Specifications

Chapter 5 — Operation 31
Call Monitor The call monitor can display any live camera in the full screen
format. To select a camera for display on the call monitor:
1. Press the call button. The call light comes on, indicating
the multiplexer is in the call select mode. If the light does
not come on, the multiplexer is in the main select mode.
Press call again to start over.
2. Press any camera button. The call monitor displays the
selected camera.
To exit the call select mode, press the call button. The
multiplexer resumes normal operation.
Viewing Multiple Cameras
The main monitor displays multiple cameras in any available
format: Picture-In-Picture (PIP), 2x2, 3x3 (9 and 16-camera
models only) and 4x4 (16-camera models only). Compose each
format by selecting the cameras and their location on screen.
Cameras not already displayed can be sequenced in the lower
right window of any multiple camera format. See Sequencing
Cameras for details.
Picture in Picture (PIP) The Picture-In-Picture format displays a full screen
“background” picture with a 1/16 size picture “insert.” A
camera can be selected for display and can be swapped
instantly between the background and the insert. The insert
can also be sequenced.
1. Press the PIP button. The multiplexer displays the current
camera and the last selected PIP insert camera.
2. Press the camera (1–16) button for the desired PIP insert
camera. The selected camera appears full screen.
3. Press the PIP button again. The multiplexer swaps the
two cameras and puts the selected camera in the PIP insert.
4. Press the camera (1–16) button to view full screen.
You can swap the background and insert cameras at any time
by pressing the PIP button.
The multiplexer remembers the PIP camera selection and
recalls it the next time the PIP format is displayed.