Specifications

30 Multivision® Pro Installation and Operation Manual
SETUP MODE
Setup mode allows you to customize multiplexer operation
to suit a specific application. To enter the setup mode, press
the buttons required to access system setup menus (see Security
Measures in the front of this manual for instructions). See
Chapter 4 — Setup for a description of the setup menu system.
Viewing One Camera
The main monitor can display any live or recorded camera in
the full screen format. It can also display a movable 2x zoom
of any camera.
Main Monitor
Full Screen
Press any camera (1–16) button when the call light is not lit.
The multiplexer displays the selected camera full screen. You
can also press the full screen button to switch to the full screen
format. The main monitor displays the last camera selected
in this format.
The 2x Zoom Press the zoom button while viewing full screen to zoom the
main monitor display. The multiplexer displays a 2x zoom
picture with a zoom window insert.
The zoom window contains a one quarter sized view of the
current camera, overlaid with a movable zoom pointer. The
pointer marks the part of the picture on display.
Zoom Control 1. Display the desired camera in the full screen format.
2. Press the zoom button to display the zoom window.
3. Press the up, down, left and right arrow buttons to move the
zoom pointer. The multiplexer moves the 2x display
accordingly.
To move diagonally, press the up or down arrow button and the
right or left arrow button simultaneously; for example, press the
up arrow button and the left arrow button to move the zoom
window diagonally to the upper left of the display.
The zoom window disappears two seconds after the last button
press to provide a clear view. Press any arrow button to recall it.
To return to the full screen format, press the zoom button again or
press any camera button.
The multiplexer remembers the selected camera and the position
of the zoom window between zoom operations.