Specifications

26 Multivision® Pro Installation and Operation Manual
DELAY The DELAY option determines how long the multiplexer must
detect motion at the current camera before initiating a motion
alarm. Motion of shorter duration does not trigger a motion
alarm. DELAY is useful in preventing sudden changes (like
those caused by lights or shadows) from triggering a motion
alarm. The DELAY setting has no affect on activity detection
(priority-based camera recording).
To set the DELAY in seconds, use the arrow buttons to move
the flashing highlight to the DELAY option and select a value:
OFF, 0.5S, 1SEC, 1.5S, 2SEC, 3SEC or 5SEC.
The default DELAY option setting is OFF.
Working with Motion Targets The targets on each motion setup screen can be turned on or
off individually, by row or by screen. Active targets are circled
(this is the default). Inactive targets are not circled. To set up
targets, use the following front panel buttons:
zoom — turns the target cursor on or off.
up arrow — moves the target cursor up one row at a time.
down arrow — moves the target cursor down one row at a
time.
left arrow — moves the target cursor to the left (4 and 9-camera
models only).
right arrow — moves the target cursor to the right (4 and 9-
camera models only).
live — turns all targets in the current row ON.
tape — turns all targets in the current row OFF.
sequence — turns all targets on the screen ON.
call — turns all targets on the screen OFF.
camera (1–16) — toggles the corresponding target on the
cursor line off or on. Move left or right (16-camera models
only) by pressing camera buttons to the left or right of the
current target.
function — saves current motion target setting and displays
the next screen.