Specifications

24 Multivision® Pro Installation and Operation Manual
The highlight is initially positioned at the first option. You can:
• use the arrow buttons to select and set motion detection
options.
• press zoom to display the target cursor and select motion
targets.
• press function to display the night motion setup screen.
Motion Options The Day and Night Motion Setup screens display a status line
containing the four multiplexer motion detection options. Use
the arrow buttons to position the flashing highlight on each
option and choose the value that best suits your needs. If the
highlight is not visible, press zoom to activate it. Option
setting applies only to the time period covered by the screen
(determined by the current DAY START TIME and NIGHT
START TIME settings).
ALRM (Alarm) The alarm option selects the motion alarm operating mode for
the current camera.
NOTE: Cameras with ALRM set to OFF still function as
activity detectors. Active cameras are given
recording priority, but motion alarms are NOT
triggered.
OFF — The multiplexer does not initiate a motion alarm
when it detects activity at this camera.
TST — Select this setting to test the current motion setup.
When it detects motion, the multiplexer freezes the scene
and marks all triggered targets with an X. This helps you
see the effects of changing which targets are on, and which
are off, and the effects of different SENSE, SIZE or DELAY
settings. To repeat the test, press right arrow. To cancel the
test, press left arrow.
NOTE: After cancelling the test, the ALRM setting returns
to OFF (the default). Make sure you change the set-
ting to ON or AND if you want either type of alarm.
AND — The multiplexer initiates a motion alarm only when
it detects both activity and a contact alarm at this camera.
ON — The multiplexer initiates a motion alarm when it
detects activity at this camera.
The default alarm option setting is OFF.