Specifications

22 Multivision® Pro Installation and Operation Manual
Menu 5 — Alarm Duration
Menu 5 allows you to set the minimum multiplexer alarm
time. The ALARM DURATION setting determines how many
seconds the multiplexer remains in the alarm state after an
alarm event occurs.
Set the ALARM DURATION time using the up and down arrow
buttons. You may use any setting between 2 and 999 seconds.
The default ALARM DURATION setting is 4 seconds.
When finished, press the zoom button to go to menu 6 or
function+zoom to save all changes and leave the setup system.
Menu 6 — Global Dwell
The GLOBAL DWELL setting determines the rate at which
the multiplexer sequences cameras on the main monitor (ei-
ther full screen or in the lower right window) when sequence
is selected. It also determines the rate at which the call moni-
tor switches cameras during multiple alarm events.
Set the GLOBAL DWELL time in seconds using the up and
down arrow buttons. You may enter any setting between 1
and 99 seconds. This setting applies to all cameras.
NOTE: The Global Dwell setting affects on-screen cam-
era display only. It does NOT affect the rate at
which the multiplexer sends images to the VCR.
The default GLOBAL DWELL time is 2 seconds.
When finished, press the zoom button to go to menu 7 or
function+zoom to save all changes and leave the menu
system.
Menu 7 — Camera Titles
Menu 7 allows you to assign a title to each camera input. It
also provides access to the MOTION SETUP screens described
below.
Initially each title is the camera’s number. To change a title,
use the arrow buttons to position the flashing highlight and
select characters. A title can contain up to 10 characters
selected from the following:
0–9 A–Z _(represents a space) / : = - + .(period)