Specifications

Chapter 4 — Setup 17
SETUP MENUS
There are eight menus in the setup menu system. The follow-
ing paragraphs take you through the menu system step-by-
step, describing each menu’s purpose and options.
Menu 1 — System Time/Date
Menu 1 displays the system time and date (maintained by the
multiplexer internal clock/calendar), the product firmware
revision number and revision date. By default, the multiplexer
displays the time and date at the top of the main monitor. In
live mode, it displays the system (current) time and date. In
tape mode, it displays the time and date of the recording (en-
coded on the tape).
You can turn the time/date display off or on at any time by
pressing function+right arrow.
To set the time and date, use the arrow buttons to position the
flashing highlight over each character and set it. Enter the
time in HH:MM:SS 24-hour format. Enter the date in MM/DD/
YY format (DD.MM.YY format in the PAL version). The clock
starts running when you move the highlight into the date field.
NOTE: Be sure to turn off the VCR’s time/date display
feature. If it is turned on, it may interfere with tape
playback. Multicamera display during playback
will have time and date over each image and at
the top of the screen. If the time/date is too high
on the screen, it overlaps the vertical interval.
When finished, press the zoom button to go to menu 2 or
function+zoom to save all changes and leave the setup
system.