Specifications

16 Multivision® Pro Installation and Operation Manual
Chapter 4 — Setup
SETUP MENU SYSTEM
The on-screen menus allow you to set up key features such as
system time and date, day and night start times for motion
detection, alarm message display, alarm message latch, video
loss alarm, audible alarm, alarm input polarity, alarm output
polarity, VCR record time, VCR alarm record time, alarm du-
ration, global dwell time, camera titles, motion detection, and
system security. All setup data is stored in nonvolatile memory
where it is protected against loss due to power failure.
NOTE: To perform multiplexer setup, you must first gain
access to the on-screen menu system. Refer to
Security Measures in the front of this manual.
Once inside the menu system, multiplexer setup involves three
basic operations:
1. Selecting the menu.
2. Positioning the flashing highlight.
3. Setting the option.
Selecting a Menu
Press the zoom button to go to the next setup menu. The next
menu appears with the flashing highlight at the first option.
If you press the zoom at the last menu (SECURITY LOCK),
the unit exits the setup mode and returns to normal operation.
Positioning the Highlight
Use the left and right arrow buttons to position the menu high-
light. Press the right arrow to move the highlight to the next
character or option. Press the left arrow to move the high-
light to the previous character or option. When you reach
one end of the menu, the highlight appears at the other.
Setting an Option
Press the up arrow or down arrow to scroll through the
available settings or characters:
0–9 A–Z _(represents a space) / : = - + .(period)
When you reach the first or last setting or character, the
sequence begins again.