Specifications

Chapter 2 — Front & Rear Panels 9
8. vcr in — This BNC connector accepts the composite video
playback signal from a VCR.
9. vcr out — This BNC connector provides a composite video
signal to the record input of a VCR.
10. call mon — This BNC connector provides a composite
video signal to the call monitor for the display of any alarm
cameras (one at a time) or one live camera in the full screen
format.
11. main mon — This BNC connector provides a composite
video signal to the main monitor to display cameras in
currently selected format.
12. cam in — These BNC connectors accept the composite
video output of color or B&W cameras. Camera input
impedance termination is selectable for each camera, using
the small switch on the back panel. Use 75 Ω for
termination, or use
∞∞
∞∞
∞ if looping to other equipment.
13. cam out — These BNC connectors provide looping
camera video from the corresponding camera input.
14.
∞∞
∞∞
∞ or 75 Ω switch — These switches allow you to set
impedance for each camera input. Set the switch to 75 Ω
to terminate it, or set it to
∞∞
∞∞
∞ if looping to other equipment.