Specifications

Chapter 2 — Front & Rear Panels 7
4. down arrow (2x2) — Displays up to four cameras in the
2x2 format. Cameras not already displayed can be
sequenced in the lower right window. This button
functions as a “down” control in the zoom and setup
modes. Press function+down arrow to display the
MOTION ALARM STATUS TABLE.
5. left arrow (3x3) — Displays up to nine cameras in the 3x3
format (9 and 16 camera models only). Cameras not
already displayed can be sequenced in the lower right
window. This button functions as a “left” control in the
zoom and setup modes. Press function+left arrow to
display the ALARM COUNTER.
6. right arrow (4x4) — Displays up to 16 cameras in the 4x4
format (16-camera models only). This button functions
as a “right” control in the zoom and setup modes. Press
function+right arrow to toggle the time/date display.
7. live — Displays the camera inputs in the selected format.
It also turns on a row of motion targets in motion detection
setup.
8. tape — Selects the VCR input for viewing. During tape
playback, pressing the tape button displays recorded
video in the selected format. During tape recording, this
button permits monitoring images sent to the VCR. This
button also turns off a row of motion targets during motion
detection setup.
9. sequence — Starts automatic switching of cameras in
the lower right corner of the screen (except in the full
screen mode when it sequences full screen images). It
also turns on all motion targets during motion detection
setup.
10. call — Used before pressing a camera (1–16) button to
select a camera for full screen display on the call monitor.
This button also turns off all targets in motion detection
setup.
11. camera (1–16) — Used to display cameras in the full
screen format. Used with the call button to select a camera
for full-screen display on the call monitor. During motion
detection setup each camera button turns the
corresponding motion target on the cursor line either off
or on.