Specifications

6 Multivision® Pro Installation and Operation Manual
Chapter 2 — Front & Rear Panels
The following is a brief overview of the multiplexer front and
rear panels. Refer to Chapter 4 — Setup and Chapter 5 —
Operation for a detailed discussion of multiplexer features and
panel functions. Panel controls are illustrated below and each
button is described by name and function.
THE FRONT PANEL
Some front panel buttons have dual functions. The primary
function is listed first, followed by the secondary function (shown
in parentheses). Indicator lights (LEDs) are above each button.
1. function (1 cam) — Used in combination with other
buttons, it allows access to the system setup menus and
other special functions described below.
To: Press:
Display ALARM COUNTER function+left arrow
Toggle time/date display function+right arrow
Display
MOTION ALARM STATUS TABLE function+down
arrow
Start 1 camera recording function (1 cam)+
a camera button
2. zoom (full screen) — Press this button to view a 2x zoom
of the selected camera. Press zoom again to go back to full
screen view.
3. up arrow (PIP—Picture-In-Picture) — Displays the
currently selected camera in the full screen format, inset
with a 1/16 size picture of one other camera. The inset
picture can be changed to a different camera or used for
sequencing cameras. This button functions as an “up”
control in the zoom and setup modes.
Figure 5 — Front Panel Controls and Indicators