Specifications

6.8
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Video Transmission and Wireless
NVT
Video Transmission and Wireless
D
Receivers;Powered/17324
Index1.Netw orking Systems //Video Products//Video Sec
urity Systems
NVT PR28650V2-210281.eps
Available in 8, 16, or 32 channels in 1U rack-mount
configurations. The
NV-8PS42-PVD and the NV-16PS42-PVD deliver up to 1 amp of individually floating
camera power and two video outputs per channel. The NV-32PS42-PVD model
provides five amps per channel and one video output per channel. They offer
plug-and-play analog camera power and connectivity at twice the distance of
RG-59/U, and five times the distance of PoE Ethernet.
These hubs represent the culmination of years of NVT development, providing
all-in-one delivery of camera power, auto-equalized video, and P/T/Z telemetry data,
all over extended distances of 4-pair Cat 5 or Cat 6 wire. Using future-proof UTP-based
EIA/TIA 568B structured building wiring, these hubs are designed for a fast
labor-saving installation. Depending on camera current, distances up to 1,500 feet
(450 m) are supported.
FEATURES
• Fully integrated multichannel floating (isolated) power supplies which ensure
total ground-loop immunity
• Provides 28 V AC camera power while receiving fully equalized video
transmission and delivering P/T/Z telemetry all over a single 4-pair Cat 5e cable
Transceivers;IP/17960
Index1.Netw orking Systems //Video Products//Video Sec
urity Systems
NVT PR34829V2-263129.eps
The NVT Model NV-EC1701 Ethernet/PoE over Coax EoC Tr
ansceiver is a compact
media converter that allows 10/100BASE-T Ethernet and PoE power to be transmitted
using coax cable. These EoC devices are typically used in legacy installations where
existing coax is redeployed as part of an upgrade to IP cameras. 48 V DC Class
2 power is delivered to one transceiver, which distributes it to up to four remote
transceivers and their PoE cameras. These transceivers are extremely simple to use,
with no IP or MAC address configuration required. Status LEDs indicate power and
link connectivity/activity for RJ45 and BNC ports. The NV-EC1701 is backed by NVT's
award-winning customer support and limited lifetime warranty.
FEATURES
• Transmit 10/100BASE-T full duplex Ethernet up to 2,500 ft. (750 m) over
RG-59 (or similar)
• Supports up to 60 Mbs of continuous effective bandwidt
h
• Powers PoE cameras (or other PoE devices), up to 45 watts
• One EoC transceiver at the network end can support up to four remote
transceivers/IP cameras using BNC "T" adapters
• Up to four EoC transceivers may be rack-mounted on a NV-RM8/10
• 48 V DC from one power supply is distributed over the coax to all
connected equipment
• Transparent network "plug-and-play" connectivity; no configuration or
setup required
• Supports all networking protocols (UDP, TCP/IP, HTTP, etc.)
• Advanced transmission and power technology with built-in transient protection
• Limited lifetime warranty
Power Supply StubEQ Active Receiver Hubs
Anixter No. Vendor No. Description
422121 NV-8PS42-PVD 8-channel power supply StubEQ receiver
hub (one amp/channel,
2 video outputs/channel)
422122 NV-16PS42-PVD 16-channel power supply StubEQ receiver
hub (one amp/channel,
2 video outputs/channel)
422123 NV-32PS42-PVD 32-channel power supply StubEQ receiver
hub (0.5 amp/channel)
NV-EC1701 Ethernet/PoE over Coax EoC Transceiver
Anixter No. Vendor No. Description
442049 NV-EC1701 Ethernet/PoE over Coax EoC Transceiver
442054 NV-EC1701-KIT1 1-camera kit
442055 NV-EC1701-KIT2 2-camera kit
442056 NV-EC1701-KIT3 3-camera kit
442057 NV-EC1701-KIT4 4-camera kit
Revise - Sec06 Video Transmission and Wireless.fm Page 8 Tuesday, December 11, 2012 11:30 PM