Specifications

6.6
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Video Transmission and Wireless
NVT
Video Transmission and Wireless
D
Transmitters;Passive/15211
Index1.Netw orking Systems //Video Products//Video Sec
urity Systems
NVT PR21691V2-125583.eps
The NVT model NV-226J-PV Video Transmitter and 12 V D
C Converter is a passive
(non-amplified) video transmitter combined with a 24 AC-to-12 V DC converter.
Designed to fit on the back of a fixed 12 V DC camera, this unit is architected to
convert 24 V AC power from the control room, while delivering real-time baseband
(composite) video at extended distances, all over one 4-pair UTP cable.
FEATURES
• Extended camera power and video (distance) routed through UTP and RJ45
• Supports 12 V DC cameras with onboard regulated power
• Use with NVT's PVD Power Supply Hubs and Cable Integrators
• Video up to 3,000 ft. with NVT's Active Receiver Hubs
• Video up to 750 ft. with NVT's Passive Receiver Hubs
• Supports "Up-the-Coax"-type control signals up to 750 ft.
• Exceptional interference rejection
• Built-in transient protection
• Limited lifetime warranty
Power Supplies;Video/14213
Index1.Netw orking Systems //Video Products//Video Sec
urity Systems
NVT PR13607V2-31167.eps
The NVT models NV-4PS10-PVD and NV-16PS10-PVD are multichannel power supply
integrator hubs which combine a one amp/channel power supply with pass-through
video and telemetry data, for up to four and 16 cameras respectively, all over UTP
wire. Designed for installation in the wiring/IDF telecom closet, or at the control/MDF
room, they consolidate connectivity via standard 4-pair RJ45 EIA/TIA 568B-compliant
premises wiring and pin-outs.
FEATURES
• Provides Class 2 SELV camera power, pass-through video and telemetry data
connection from four to 16 cameras, each via a single RJ45 4-pair UTP cable
• Standard telecom/datacom structured cabling pin-outs
per EIA/TIA 568B
• Independently selectable 24 or 28 V AC with one amp ma
x . per channel
• Automatic-reset fault protection, transient protection
• Individually floating outputs ensure total ground-loop immunity
• Use with the NV-216PV, NV-218-PVD or the NV-226J-PV transceiver at the
camera and passive or active receivers at the control room
• Power cameras via UTP over significant distances
• 1U high; 12 in. deep; wall, desk or rack mountable
• Limited lifetime warranty
Receivers;Powered/14214
Index1.N etworking Systems //Video Produc ts//Video Sec
urity Systems
NVT PR21692V2-125568.eps
The NVT models NV-4PS13-PVD NV-8PS13-PVD and NV-16PS13-PVD are 4-, 8- and
16-channel hybrid power supply and passive receiver hubs. Designed for installation
in the MDF/equipment room, these hubs have independently selectable 24 V
AC-OFF-28 V AC outputs that can support channel at-distance camera loads up to one
amp per channel.
FEATURES
• Provides Class 2 SELV camera power, pass-through video and telemetry data
connection from eight to 16 cameras, each via a single RJ45 4-pair UTP cable
• Standard telecom/datacom structured cabling pin-outs per EIA/TIA 568B
• Independently selectable 24 or 28 V A C with one amp max. per channel
(10 amp aggregate)
• Automatic reset fault protection and built-in transient protection
• Individually floating outputs ensure total ground loop immunity
• Diagnostic LEDs show load/no load, mis-wires and overload conditions
• Use with the NV-216PV, NV-218-PVD or the NV-226J-PV transceiver at the
camera and passive or active receivers at the control room
• Power cameras via UTP over significant distances
• 1U high; 12 in. deep: wall-, desk- or rack-mountable
• Limited lifetime warranty
Single-channel Video Transmitter and 12 V DC Converter
Anixter No. Vendor No. Description
363158 NV-226J-PV Passive video transmitter with a
24 AC-to-12 V DC converter
PVD Power Supply Hubs
Anixter No. Vendor No. Description
362817 NV-4PS10-PVD 4-channel power supply cable
integrator hub
341355 NV-16PS10-PVD 16-channel power supply cable
integrator hub
393093 NV-4PSRMBK Rack panel kit for 4-port power
supply products
Multichannel Power Supply Passive Receiver Hubs
Anixter No. Vendor No. Description
369845 NV-4PS13-PVD 4-channel power supply passive
receiver hub
341356 NV-8PS13-PVD 8-channel power supply passive
receiver hub
Revise - Sec06 Video Transmission and Wireless.fm Page 6 Tuesday, December 11, 2012 11:30 PM