Specifications

6.14
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Video Transmission and Wireless
IFS
Video Transmission and Wireless
D
Transceivers;Data/15012
Index1.Netw orking Systems //Video Products//Video Sec
urity Systems
IFS PR21461V2-121576.eps
The IFS DE7200, D7200M and DE7400 Series Ethernet to
Fiber Media Converters are
designed to convert and transmit Ethernet signals over fiber. When space is at a
premium, use the D7200M series inside IP and megapixel camera housings. The
DE7200 and D7200M convert 10/100 signals. The DE7400 series converts
10/100/1000 Ethernet signals. The entire series is designed to work over multimode
or single-mode to take Ethernet signals beyond the networking limitations of
100 meters. The series is environmentally hardened to operate in extreme
temperatures. Loss of optical link contact closure for remote alarm sensing. Status
indicating LEDs for power and data rate are present at the RJ45 connector. At the
fiber optic transceiver end, link and data LEDs provide operational status.
Plug-and-play design ensures ease of installation requiring no optical adjustments.
The modules are available in stand-alone only. Device used to take IP signals from
access control, IP cameras, megapixel cameras, traffic systems, or any IP system
farther than 300 feet.
FEATURES
• Auto Network Detection MDI/MDI-X sensing
• Full-duplex or half-duplex data
• Distances up to 45 km (28 miles)
• Extended ambient operating temperature range: -40°C to +74°C
• Designed to meet full compliance with the environmen
tal requirements (ambient
operating temperature, mechanical shock, vibration, humidity with
condensation, high-line/low-line voltage conditions and transient voltage
protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal
Control Equipment
• Multimode and single-mode versions available
• SC optical connectors standard
• No in-field optical adjustments required
• Power, transmit and receive data status LED indicators
• Loss of optical link contact closure
• LEEE 802.3 compliant
• Lifetime warranty
Transceivers;Data/15013
Index1.N etworking Systems //Video Produc ts//Video Sec
urity Systems
IFS PR21462V2-121573.eps
The IFS DE7300 Series Gigabit Ethernet 3-port transceiver is designed to transmit and
receive 1,000 Mbps data over fiber or 10/100/1000 Mbps data over Cat 5e electrical
cable. It is available in any combination of electrical or optical ports. The DE7300 is
environmentally hardened to operate in extreme temperatures. Loss of optical link
contact closure for remote alarm sensing. Status-indicating LEDs for power and data
activity are present at the RJ45 connector. At the fiber optic transceiver end, link and
data LEDs provide operational status. Plug-and-play design ensures ease of
installation, requiring no optical adjustments. The modules are available in
stand-alone versions only.
FEATURES
• 10/100/1000 Mbps Ethernet
• 10/100/1000BASE-T electrical port
• 1000BASE-FX optical port
• Full-duplex or half-duplex data
• Automatic Network Detection Mdi/Mdi-x
• Designed to meet full compliance with the environmental requirements (ambient
operating temperature, mechanical shock, vibration, humidity with
condensation, high-line/low-line voltage conditions and transient voltage
protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal
Control Equipment
• Extended ambient operating temperature range: -40°C to +74°C
• No in-field optical adjustments required
• Power, transmit and receive data status LED indicators
• Loss of optical link contact closure
• Distances up to 30 km (18 miles)
• SC optical connectors standard
• IEEE 802.3 compliant
• Lifetime warranty
IFS Hardened Ethernet to Fiber Media Converters
Anixter No. Vendor No. Description
359483 DE7200-M 2-port Ethernet media converter, 1 x
100 FX MM, 1 x 10/100 TX electrical
359484 DE7200-MM 2-port Ethernet repeater, 2 x 100 FX MM
359485 DE7200-MS 2-port Ethernet mode converter, 1 x
100 FX MM, 1 x 100 FX SM
359486 DE7200-S 2-port Ethernet media converter, 1 x
100 FX SM, 1 x 10/100 TX electrical
359488 DE7210M 2-port mini Ethernet converter, MM,
1300 nm, 1F
393861 DE7230M 2-port mini Ethernet converter, SM,
1300 nm, 1F
359487 DE7200-SS Ethernet on fiber repeater (4 SM) 10/100
359489 DE7230M Ethernet to fiber (2 SM) 10/100 mini
media converter
424766 DE7400-MM Ethernet on fiber repeater (4 MM) GigE
424767 DE7400-MS Ethernet on fiber mode converter,
single-mode to multimode GigE (2 SM and
2 MM)
424769 DE7400-SS Ethernet on fiber repeater (4 SM) GigE
10/100 Mbps Ethernet 3-port Transceiver
Anixter No. Vendor No. Description
Revise - Sec06 Video Transmission and Wireless.fm Page 14 Tuesday, December 11, 2012 11:30 PM