Operating instructions

8000-1828-01, Rev. B Recorder Controller/Interface Installation Instructions 11
Declaration of Conformity
Declaration of Conformity
Manufacturer’s Name: Sensormatic Electronics Corporation
Manufacturer’s Address: 1 Blue Hill Plaza
2
nd
Floor
Pearl River, New York, 10965 USA
Declares, that the products listed below:
Name/Type: AD100 Series Recorder Interface Modules
Model Numbers: AD100XA-1A, AD100IR16-1A, AD100RL8-1, AD100RS8-1
comply with all applicable directives as demonstrated by conformance to the following Product Specifications:
Safety: EN 60950: 1992
EMC: EN 50130-4: 1995
EN 55022: 1994, Class B
EN 61000-3-2: 1995
EN 61000-3-3: 1995
EN 61000-4-2: 1995
EN 61000-4-3: 1996
EN 61000-4-4: 1995
EN 61000-4-5: 1995
EN 61000-4-6: 1996
EN 61000-4-11: 1994
Supplementary Information:
The products herewith comply with the requirements of the Low Voltage Directive, 73/23/EEC as amended by 93/68/EEC, and the
EMC Directive, 89/339/EEC as amended by 93/68/EEC.
Pearl River, NY, USA 15 January, 2001
Harold D. Johnson, Ph.D.
Director of Engineering
European Contact: Sensormatic France S.A.
7, rue Alexis de Tocqueville, Parc de Haute Technologie, 92183 ANTONY CEDEX