User guide

Keypad Features and Operation
Digital Life User Manual | Page 21 of 62 ATT-UM-V1.1-201303
Feature Device(s) Sound Operation
Low Battery Indication
for Keypad, Siren,
915MHz Repeater,
433MHz Repeater,
Takeover Module,
Smoke Detector, CO
Detector, Door/Window
Sensor, Glass Break
Sensor or Motion
Sensor (PIR)
Keypad
(SW-ATT-PAD2W)
Chirps once a
minute
If battery is low in any
device, chirp will occur once
a minute until silenced
RF Jamming Sounder in DLC-
100 Digital Life
Controller
Cabinet
Continuous tone During a condition of RF
jamming the sounder in the
DLC-100 Digital Life
Controller Cabinet will beep
continuously
Chirp = 0.5 second
Short Beep = 1 second
Long Beep = 2 seconds
Priority of Alarm Signaling
There is an automatic prioritization of alarm signaling to the AT&T Digital Life Central
Monitoring Centers based on the type of alarm as indicated in the following table from
highest to lowest priority.
Sounding and Displaying Device Trouble Conditions
The Keypad(s) (SW-ATT-PAD2W) will display messages and chirp whenever device
trouble conditions exist. The user will be able to silence the chirping sound by pressing
the # button on the keypad, but the display message will continue to be displayed as
long as the trouble condition exists. The chirping sound is a 0.5 second tone every
minute. The following table contains the device trouble condition messages that can
appear in the keypad display. The chirping sound will automatically be silenced between
9:00PM to 9:00AM local time.
Priority
(High to Low)
Type of Alarm
1 Fire Alarm/Fire Emergency
2 Carbon Monoxide (CO) Alarm
3 Intrusion Alarm/Police Emergency
4 Auxiliary Emergency