User manual

Security
Indicates the overall status of your
security system.
To disarm the system:
1. Click the Security Status header when it is in the
Armed state:
Or select [Security > Disarm] on the toolbar.
2. Enter your 4-digit master code, and click
[Disarm].
To arm the system:
1. Click the Security Status header when it is in the
Disarmed state.
Or select [Security > Arm] on the toolbar.
2. If any security zones are currently faulted,
preventing the system from being armed, you
must click the [Turn Zone Off] button for that
zone before arming the system.
3. Select the arming mode.
• Arm Stay — There are still people on the
premises.
• Arm Away — Everyone is leaving the house.
• Arm Night — Everyone is going to bed. This
mode works the same as Arm Stay except that
there is no entry delay period. If an entry/exit
zone is opened, an alarm sounds immediately.
4. Enter your 4-digit master code.
5. C l i c k [Arm Now].
Managing Keypad Codes
Keypad codes are used to arm or disarm
the system. Multiple keypad codes can be
assigned to track who enters and leaves
the premises. To manage keypad access
codes, select [Security > Keypad Codes] on
the toolbar and add a new access code or
modify current access codes.
Web Access continues on next page...
QUESTIONS?
Learn more and watch How-To Videos at comcast.com/XFINITYHomeSupport
15