User manual

Checking System Status
1. Press the button to light the LED to show
the current status of the security system.
2. The LED flashes red once to indicate that it has
contacted the system, then:
— Lights green for 3 seconds if the system
is disarmed
— Lights red for 3 seconds if the system is armed
— Lights orange for 3 seconds if the system is
not ready to be armed (for example, a door is
open)
Arming the System
From the Keychain Remote, you can arm
your system in [Arm Away] or [Arm Stay]
mode. [Arm Night] mode must be activated
from the Touch Screen Controller or
Subscriber Portal.
Arm Away
Press the button for about 2 seconds to arm
the system in [Arm Away] mode (the home is
unoccupied).
The LED flashes red once to indicate that it
has contacted the system, then lights red for
1 second. The exit delay starts.
Arm Stay
Press the button for about 2 seconds to arm
the system in [Arm Stay] mode (there are still
people on the premises).
The LED flashes red once to indicate that it
has contacted the system, then lights red for
1 second. The exit delay starts.
KEYCHAIN REMOTE
Keychain Remote continues on next page...
QUESTIONS?
Learn more and watch How-To Videos at comcast.com/XFINITYHomeSupport
11