Cut Sheet

1 of 2
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: [phone] www.acuitycontrols.com © 2014-2016 Acuity Brands Lighting, Inc. All rights reserved. 02/02/16
OVERVIEW
The WSX Family of wall switch occupancy sensors provides simple and cost effective solutions
for commercial and residential lighting control applications. All WSX Family sensors have a
stylish low profile appearance, soft-click buttons, and provide small motion detection up to 20 ft
(6.10 m), making them perfect for private offices, private rest rooms, closets, copy rooms, or any
other small enclosed space. Additionally, all WSX Family sensors have a patent-pending wiring
method that enables them to function either with or without a neutral connection. WSX units
come pre-configured for wiring without a neutral, however if connection to neutral is required by
code, contractors can convert the unit in seconds.
FEATURES
• Compatible w/LEDs, electronic & magnetic ballasts, CFLs, & incandescents
• 100% passive detection, no potential for interference with other building systems
• Small motion detection to 20 ft
• Push-button programmable without removing cover plate - adjustable time delays &
operating modes
• Dual technology (PDT) utilizes PIR/Microphonics™ detection (patented)
• Self-grounding mounting strap
• Device accomodates powering over ground or neutral connection (patent pending)
• Ultra low current leakage (<0.5 mA) when connected via ground
• Fully meets NEC 2011 Section 404.2C neutral requirements - no current leakage to ground
when connected to neutral
• Line power and load wires are interchangeable - impossible to wire backwards (patented)
• Integrated Photocell (disabled by default) prevents light from turning on if sufficient
daylight is present - not available in Nightlight versions
• Vandal resistant lens
WSX Family
ORDERING INFORMATION
WSX SINGLE RELAY
Series Operating Mode
1
Voltage Color
4
Temp / Humidity
WSX Passive infrared (PIR)
WSX PDT Dual Technology (PIR/
Microphonics™)
[blank] Auto-on (default) or vacancy
SA Vacancy (default) or auto-on
VA Vacancy only
NL
2
Nightlight
[blank] 120/277VAC
347
3
347VAC
WH White AL Lt. Almond
IV Ivory BK Black
GY Gray RD Red
[blank] Standard
LT Low Temp/ High Humidity
Catalog Number: Date: Project:
Example: WSX PDT WH
WSX
WSX PDT
WSX 2P
WSX PDT 2P
WSX DUAL RELAY
Series Operating Mode
1
Voltage Color
4
Temp / Humidity
WSX 2P Passive infrared (PIR)
WSX PDT 2P Dual Technology
(PIR/Microphonics™)
[blank] Pole 1 auto-on
Pole 2 vacancy
2SA Both poles vacancy (default)
2VA Both poles vacancy (only)
NL
2
Nightlight
[blank] 120/277VAC
347
3
347VAC
WH White AL Lt. Almond
IV Ivory BK Black
GY Gray RD Red
[blank] Standard
LT Low Temp/ High Humidity
Example: WSX 2P NL WH
WSX NL
WSX PDT NL
Notes:
1 Operating Modes reprogrammable via push-button except for VA version
2 Units factory set to Vacancy (Manual On) Operating Mode
3 Wall plates included in white or ivory only for 347 VAC units
4 Matching wall plate provided for 120/277 VAC units
Warranty
Five-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
Specifications subject to change without notice.
C US LISTED