Cut Sheet

Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: [phone] www.acuitybrands.com/sensorswitch
© 2014-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/04/22
WSXA SERIES
2 of 4
ORDERING INFORMATION
WSXA Single Pole Example: WSXA MWO PDT D WH
Series Option Detection Mode eldoLED Dimming
7
Operating Mode
3
WSXA Wall Switch Sensor
(Occupancy and Daylighting)
WSXA MWO WSXA with Multi-way
Operation
[blank] Passive
Infrared (PIR)
PDT Dual
Technology
[blank] none
EZ
2
eldoLED Driver
Compatibility
[blank] On/Off
D Dimming
[blank] Automatic on (default) or Vacancy
SA Manual On (default) or Automatic On
VA Vacancy
ASL
3,4
Automatic Start Level 5VDC
Voltage Color
5
Max Dim Level
6,7
Min Dim Level
6,7
Temp / Humidity
[blank] 120-277 VAC
347 347 VAC
WH White
IV Ivory
GY Gray
AL Light Almond
BK Black
RD Red
[blank] 10 VDC
9H 9 VDC
8H 8 VDC
7H 7 VDC
[blank] 0 VDC
1V 1 VDC
2V 2 VDC
3V 3 VDC
4V 4 VDC
5V 5 VDC
6V 6 VDC
[blank] Standard
LT Low Temp/ High Humidity
WSXA 2P Example: WSXA 2P FAN WH LT
Series Option Detection Mode Poles Fan
2
Operating Mode
3
WSXA Wall Switch Sensor
(Occupancy and Daylighting)
[blank] Passive Infrared(PIR)
PDT Passive Dual Technology
2P
1
2 Poles [blank] No Fan
FAN Fan Operation
[blank] Pole 1 auto-on
Pole 2 Manual On
2SA Both poles Manual On (default)
2VA Both poles vacancy (only)
Voltage Run Time
4
Color
5
Temp/Humidity
[blank] 120-277 VAC
347
347 VAC
[blank] Pole 1 Lights
Pole 2 Fan
ASHRT Pole 1 Lights
Pole 2 Fan, Minimum Fan
Run Time per Ashrae 62.2
WH White
IV Ivory
GY Gray
AL Lt. Almond
RD Red
BK Black
[blank] Standard
LT Low Temp/ High Humidity
Adaptive Daylight Harvesting (ADH)
With Sensor Switch’s Adaptive Daylight Harvesting (ADH), automatic dimming has never been
more reliable - even in a wall switch. It works by establishing two state change set-points;
daylight and darkness. The light level in the space will then be automatically maintained
by intelligently controlling the dim level of the electric light source. Set-points can
be established using the “Set Now” option or programmed using desired light levels as
measured in foot candles (fc).
DIMMING
RANGE
DARKNESS SET-POINT
DAYLIGHT SET-POINT
AMPLE DAYLIGHT
NO DAYLIGHT
/ KEY LIGHTS FULL ON LIGHTS FULL DIM
Notes:
1 Max Dim Level default set to 9.1VDC. Min
Dim Level default set to 1.5VDC.
2 EZ only available with D option.
3 Operating Modes re-programmable via
push-button except for VA version.
4 Not available with EZ, Max Dim, or Min Dim
Level. Also requires the D option.
5 Matching wall plate provided for 120-277
VAC units.
6 Only available with D option.
7 Minimum order qty of 30 units for Max or
Min Dim Level settings. Additional time may
be required.
Notes:
1 2P does not have VLP functionality.
2 If Fan Operation is selected Operating Mode must be blank.
3 Operating Modes re-programmable via push-button except
for VA version.
4 Only available if 2P FAN is selected.
5 Matching wall plate provided for 120-277VAC Units.