Cut Sheet

Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: [phone] www.acuitybrands.com/sensorswitch
© 2014-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/04/22
WSXA SERIES
1 of 4
WSXA Series
Wall Switch Sensor
Catalog Number: Date: Project:
WSXA/WSXA MWO
On/Off
Single Relay
WSXA D/WSXA MWO D
On/Off/Dimming
Single Relay
OVERVIEW
The WSXA Family of wall switch occupancy sensors provides simple and cost effective solutions for
commercial and residential lighting control applications. All WSXA Family sensors have a stylish low
prole appearance, soft-click buttons, and provide small motion detection up to 20 ft (6.10 m), making
them perfect for private ofces, private restrooms, closets, copy rooms, or any other small enclosed
space. Additionally, all WSXA Family sensors have a patent-pending wiring method that enables them to
function either with or without a neutral connection. WSXA units come pre-congured for wiring without a
neutral, however if connection to neutral is required by code, contractors can convert the unit in seconds.
MULTI-WAY (MWO)
Our new WSXA MWO series allows for multi-location On/Off or 0-10 dimming up to 9 devices (2 device
limit when neutral-less wiring used) on a single traveler.
FEATURES
• Single Pole devices can be programmed with Sensor Switch VLP app or traditional push button
programming
• WSXA MWO can be used in conjunction with sPODMRA MWO
• Devices can be spaced up to 250 ft with MWO option
• MWO option support up to 9 additional MWO enabled devices (2 neutral-less) on a single traveler
• Compatible w/LEDs, electronic & magnetic ballasts, CFLs, & incandescents
• 100% passive detection, no potential for interference with other building systems
• Small motion detection to up to 20 ft, Large motion detection up to 36ft
• Push-button programmable without removing cover plate - adjustable time delays & operating modes
• Dual technology (PDT) utilizes PIR/Microphonics™ detection (patented)
• Device accommodates powering over ground or neutral connection (patent pending)
• Fully meets NEC 2017 Section 404.2C neutral requirements - no current leakage to ground when
connected to neutral
• Line power and load wires are interchangeable - impossible to wire backwards (patented)
• Integrated Photocell (disabled by default) prevents light from turning on if sufcient daylight is
present
• New aesthetic with vandal resistant lens
Warranty
Five-year limited warranty. This is the only warranty provided and no other statements in this specication
sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete
warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions
Note: Actual performance may differ as a result of end-user environment and application.
Specications subject to change without notice.
CAN BE USED TO
COMPLY WITH 2019
DIMMER CONTROL
DEVICE REQUIREMENTS
WSXA 2P FAN
On/Off Dual Relay