Specification

One Lithonia Way, Conyers, GA 30012 | 770-922-9000 | www.acuitybrands.com

CONTRACTOR SELECT WPD

INSTALLATION:

- WARNING: To avoid re, shock, or death. High Voltage - Turn off power at circuit breaker

or fuse and test that power is off before wiring.

- CAUTION: To reduce the risk of overheating and possible damage to other equip ment,

DO NOT install to control a receptacle, a motor-operated appliance, a uores cent lighting

xture, or a transformer supplied appliance.

- Remove wall plate and existing switch mounting screws.

- Carefully remove the existing switch from the switch box.

- Disconnect the wiring from the existing switch.

- Connect the dimmer switch as shown in the wiring diagram: Black lead to hot wire, white

lead to neutral wire, red lead to load wire, green lead to ground wire.

- Check connections to be sure they are tight, and no bare conductors are exposed.

- Insert the WPD dimmer switch into the standard outlet box carefully.

- Make sure the WPD dimmer switch supplied screws in designated location.

- Attach the wall plate.

- Restore power at the circuit breaker and test the system.

LISTINGS:

cULus Listed

For use in ambient operating temperatures ranging from - 0°C to 40°C.

WARRANTY:

5-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/support/warranty/terms-and-conditions

Note: Actual performance may differ as a result of end-user environment and application.

Specications subject to change without notice.

Specifications Dimensions

2.61"H x 1.90"W x 1.56"D (66.5mm x 48.2mm x 39.5mm)