Cut Sheet

Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: [phone] www.acuitybrands.com/nLight
© 2019-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/14/22
nPODMA
2 of 4
nPODMA Example: nPODMA DX WH
Series Poles & Scenes Dimming Control Dynamic Color Temp/Humidity
Buy America(n)
67
nPODMA [blank] None
2P Two channels
4P Four channels
2L
1
Two levels
2L AB
1
High/low step control
4L
2
Four levels with raise/lower
1SB
1
1 Scene control (2 buttons)
2S 2 Scene control (2 buttons)
2SB
1
2 Scene control (4 buttons)
4S 4 Scene control (4 buttons)
4SB
1
4 Scene control (8 buttons)
[blank] Standard
DX On/off +
raise/lower
control
[blank] Standard
CCT
3
Correlated color
temperature
GRSC
5
Grayscale
COLOR
5
Color control
EDUTW
4
Tuneable White
WH White
IV Ivory
GY Gray
AL Lt Almond
BK Black
RD Red
[blank] Normal
LT Low temp
[blank] Standard
BAA Buy America(n)
Act Compliant
ORDERING INFORMATION
WIRING
TYPICAL WIRING
WallPods and/or nLight wall switch sensors can be configured together to create zones with multiple switching locations.
nPP16 EFP
CAT-5
LOAD
CAT-5
120 V
277 V
-
-
BLK
ORN
Power to WallPod device is provided via the CAT-5e connection to an nLight enabled fixture, nLight power pack (e.g. nPP16), power supply (nPS80), or Bridge (nBRG 8).
nPP16 EFP
CAT-5
LOAD
CAT-5CAT-5
120 V
277 V
-
-
BLK
ORN
ON/OFF
3-WAY CONFIGURATION WIRING
Notes
1. Not available with DX option.
2. Only available with DX option.
3. Only available with 2P DX version.
4. Only available with 4S and 4S DX versions.
5. Only available with 2P DX and 4S DX versions.
6. Only available in WH, IV, or GY.
7. Not available with LT option.
8. Only available for Variety Packs.
9. Not available for SSW Series.
10. Ships with custom screwless wall plate.
11. Single units only available with SSW series.
ACCESSORIES
Series # of Gangs Mounting Color Packaging
WS xPODA Wall Plates
(Standard)
SSW
10
Sealed Cover
1 GNG Single
Gang
[blank] Standard WH White
IV Ivory
GY
9
Gray
AL
9
Lt Almond
BK
9
Black
RD Red
VP
9
Variety Pack
[blank] Single Unit
11
M5
9
5 Pack
M6
8,9
6 Pack
All nPODMA switches are shipped with wall plates and mounting anges (WS XPODA), and mounting anges (WS XPODA), however, the following order information is
available to acquire replacement wall plates. Also compatible with the WALLP Series.
WALL SWITCH CLEANING
It will occasionally be necessary to clean the wall switches. All nPODMA switches may be wiped down with a soft cloth or paper towel dampened with
glass cleaner, vinegar and water, hydrogen peroxide, or a mild abrasive. Spray a limited amount on the cloth or paper towel prior to applying. Do not
spray cleaner on the switches directly, and do not wipe the switches down with a towel saturated (drips when wrung out) with cleaner.
If the ability to clean the switches using chemical spray disinfectants is desired, we recommend the use of the Sealed Screwless Wall Plate (SSW). The
Sealed Screwless Wall Plate is a cover for the standard wall plate, designed with an IP54 rating. It consists of a transparent silicone rubber layer that
covers the wall switch to prevent liquids from entering the wall switch while maintaining a tactile button feel. The Sealed Screwless Wall Plate is the ideal
solution to help protect a wall switch from fluid entering the device while enabling the use of disinfectants recommended by the EPA for use against
SARS-CoV-2, the coronavirus that causes COVID-19, which often require spraying or saturating the surface.
For more information on
the Sealed Covers
ON/OFF + DIMMMING (nPODMA DX)
[D] Dimming Control
CAT-5
LOAD
CAT-5
120 V
277 V
-
-
BLK
ORN
VIO
nPP16 EFP
PNK