Cut Sheet

Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: [phone] www.acuitybrands.com/nLight
© 2019-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/14/22
nPODMA
1 of 4
OVERVIEW
The nPODMA Series WallPods are single gang nLight-enabled decorator wall switches that enable toggle/
raise/lower/scene control of lighting zones. Equipped with soft-click push-buttons, and a green LED
indicator for each button, these devices allow eld replaceable and custom engraved button options.
nPODMA WallPods communicate with other nLight devices, via CAT-5e cable, through RJ-45 connectors
and can be daisy-chained to work with nLight power packs and/or nLight-enabled xtures to provide switch
control operations.
The scene control option presents a convenient method of selecting a custom lighting control scene for
spaces in which installed, or requesting a global prole scene be run across several remote zones. By
default, scene control wall switches are congured as on/off toggle switches and are to be customized
programmatically through the SensorView software.
*In order to utilize a blink warning, system gateway and additional programming is required.
FEATURES
• Communicates with nLight network
• Remotely congurable/upgradeable
• Soft-click push-button control
• Sets lights to one of two or four preset levels with single button push (nPODMA xL versions only)
• Scene controllers run locally stored scenes or global scenes (stored on gateway)
• Capable of Programming 4 Different Scene Types
• Local “Prole” Scene — Modies the operational conguration of up to 80 devices in the local
zone. Stopping scene will revert devices to default settings.
• Local “Preset” Scene — Modies on/off/dim levels for up to 16 local switch groups. Exit scene
through additional “preset” scene or WallPod control.
• Global “Prole” Scene — Modies the operational conguration of any devices on the system.
Stopping scene will revert devices to default settings. Scene is stored on the system Gateway.
• Global “Preset” Scene — Modies on/off/dim levels for up to 128 global switch groups. Exit
scene through additional “preset” scene or WallPod control.
• Easy-to-install screwless wall plate design offers a clean, uninterrupted aesthetic for a more rened look
in the space.
• A full range of color options provides a variety of choices for your building designs with the assurance
that the housing and the wall plate match.
• 1, 2, or 4 channel on/off
• 1, 2, or 4 channel raise/lower
• “Dynamic” options for custom button names when pairing with Acuity Brands nTUNE xtures
CUSTOM BUTTON ENGRAVING
• Standard Button labeling is shown on back
• Custom lettering for units can be specied and ordered at: nGrave Form
• To ensure color uniformity, ordering templates facilitate specifying all buttons on a unit as custom
lettered. Replacing single buttons not recommended
• Buttons may ship separately and require eld installations
nPODMA
Wallpod: On/Off & On/
Off+Raise/Lower
Catalog Number:
Date: Project:
Capable
This item is an A+ capable component, which has been designed and tested to provide out-of-the-box
luminaire compatibility with simple commissioning, when included as part of an A+ Certied™ Solution.
To learn more about A+, visit www.acuitybrands.com/aplus.
Buy American
BAA variants of this product are assembled in the USA and meet the Buy America(n) government
procurement requirements under FAR, DFARS and DOT. Please refer to www.acuitybrands.com/buy-american
for additional information.
Warranty
Five-year limited warranty. This is the only warranty provided and no other statements in this specication
sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete
warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions
Note: Actual performance may differ as a result of end-user environment and application.
Specications subject to change without notice.
Buy American