Cut Sheet
2 of 2
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com © 2014-2016 Acuity Brands Lighting, Inc. All rights reserved. 02/02/16
WIRING (DO NOT WIRE HOT)
nCM PDT 9 - TN-101-02.
COVERAGE PATTERN
nPP16
LOAD
CAT-5e
120 V
277 V
-
-
BLK
ORN
CAT-5e
VIO (Dim Output)
GRY (Common)
GRN *
T568B pin/pair assignment is recommended for all CAT-5e cables. Sensor power is provided via the CAT-5e connection to an nLight power pack/supply, nLight-enabled digital luminaire, or
nLight Bridge.
*Note: A green wire is available for an optional connection to an approved ground. This wire is isolated
from the class 2 circuitry of the sensor. Connection will provide improved network protection in case
of accidental landing of line voltage to VIOLET or GRAY dimming wires. If an approved ground is not
available the green wire should be capped.
nPP16
LOAD
CAT-5e
120 V
277 V
-
-
BLK
ORN
CAT-5e
nCM PDT 9 ADCnCM PDT 9 & nCM PDT 9 ADCX
0 ft
9
0 m
2.7
SIDE VIEW
TOP VIEW
12
6
0
ft
6
12
3.7
1.8
0
m
1.8
3.7
12 6 0 ft 6 12
3.7 1.8 0 m 1.8 3.7
STANDARD RANGE 360º LENS WITH MICROPHONICS™
• Best choice for small motion (e.g. hand movements) detection
• Viewing angle of 56º in a 360º conical shaped pattern
• Provides 12 ft (3.66 m) radial coverage when mounted to standard 9 ft (2.74 m) ceiling
• 8 to 15 ft (2.44 to 4.57 m) mounting heights provide 10 to 20 ft (3.05 to 6.10 m) radial
coverage
• Microphonics™ provides overlapping detection of human activity over the complete PIR
coverage area. Advanced filtering is also utilized to prevent non-occupant noises from
keeping the lights on.
Note: Sensor’s screw axis is
aligned with a long detection
segment
0 ft
9
0 m
2.7
SIDE VIEW
TOP VIEW
12
6
0
ft
6
12
3.7
1.8
0
m
1.8
3.7
12 6 0 ft 6 12
3.7 1.8 0 m 1.8 3.7