Cut Sheet

Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: [phone] www.acuitybrands.com/nLight
© 2014-2019 Acuity Brands Lighting, Inc. All rights reserved. Rev. 01/02/19
nCM xx RJB - TN-139-001
1 of 4
OVERVIEW
The nCM xx RJB family of nLight ceiling/surface mount occupancy sensors provide a range of
networked sensor solutions for applications with nished ceilings (e.g. ceiling tiles, sheetrock,
plaster). nCM xx RJB family sensors utilize 100% digital Passive Infrared (PIR) detection and
are available with several lens options, providing exibility for multiple mounting height and
coverage pattern requirements. Dual technology occupancy detection can also be added as an
option for applications where occupants are stationary for long periods of time. All sensors have
integrated on/off photocells as a standard feature, with automatic daylight harvesting/dimming
control as an available option. Additionally, nCM xx RJB family sensors are also available with an
optional auxiliary low voltage relay for simple integration with a BMS system or other building
system.
nCM xx RJB family sensors are powered via the nLight network bus and typically communicate
with one or more nLight enabled luminaires (e.g. Lithonia VTLED Series) or nLight relay/dimming
packs to enable control of xtures individually or in groups. These congurations work
standalone and do not require a connection to a larger nLight network.
FEATURES
• 100% digital PIR detection
• Integrated photocell standard (disabled by default) — Photocell views down through sensor lens and
when enabled provides two selectable modes of operation
– On/Off mode: Photocell has full on/off control during periods of occupancy
– Inhibit mode: Photocell can prevent lights from turning on if adequate daylight is available,
but cannot turn lights off
• Optional dimming photocell (ADCX option)
• Optional auxiliary low voltage relay (AR option) for dry contact output - relay only tracks occupancy by
default, ignoring switch and photocell commands
• LED status indicator
• Adjustable settings (e.g. occupancy time delays, photocell set-points) via push-button or SensorView
software application
• Broadcasts occupancy and photocell information over a local nLight channel
• Remotely upgradeable rmware
Catalog Number: Date: Project:
Capable
This item is an A+ capable component, which has been designed and tested to provide out-of-the-box
luminaire compatibility with simple commissioning, when included as part of an A+ Certied™ Solution.
To learn more about A+, visit www.acuitybrands.com/aplus.
Warranty
Five-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
Specifications subject to change without notice.
nCM xx RJB
nCM PDT xx RJB
nCM 9 RJB
nCM PDT 9 RJB
nCM 10 RJB
nCM PDT 10 RJB
nCM 6 RJB
nCM xx RJB Example: nCM PDT 9 ADCX RJB
Series / Detection Coverage Type Options (See Below) RJ45 Port Location
nCM PIR Detection
nCM PDT Dual Tech (PIR/ Microphonics)
9 Small Motion 360°
10 Large Motion 360 °
6 High Mount 360 ° (not available with PDT version)
RJB Rear RJ45 (CAT5e patch cable & RJ45
splitter included)
ORDERING INFORMATION
nCM xx RJB Options
Photocell Auxiliary Relay Dual Time Delay ² Temp/ Humidity
[blank] On/Off Photocell (disabled by default)
ADCX Automatic Dimming Control (of remote dimming output)
[blank] None
AR Low Voltage Aux. Relay
[blank] Single Time Delay
2P Dual Time Delay
[blank] Standard
LT Low Temp / High Humidity
NOTES:
1. For information on models with side RJ45 ports, see website
2. Not available with AR or ADCX options