Cut Sheet
2 of 2
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com © 2014-2016 Acuity Brands Lighting, Inc. All rights reserved. 02/02/16
nCM 9 - TN-100-02
WIRING (DO NOT WIRE HOT)
STANDARD RANGE 360º LENS
• Best choice for small motion (e.g. hand movements) detection
• Viewing angle of 56º in a 360º conical shaped pattern
• Provides 12 ft (3.66 m) radial coverage when mounted to standard 9 ft (2.74 m) ceiling
• 8 to 15 ft (2.44 to 4.57 m) mounting heights provide 10 to 20 ft (3.05 to 6.10 m) radial
coverage
nPP16
LOAD
CAT-5e
120 V
277 V
-
-
BLK
ORN
CAT-5e
VIO (Dim Output)
GRY (Common)
GRN *
Note: Sensor’s screw axis is aligned
with a long detection segment
12 6 0 ft 6 12
3.7 1.8 0 m 1.8 3.7
SIDE VIEW
0 ft
9
0 m
2.7
TOP VIEW
12
6
0
ft
6
12
3.7
1.8
0
m
1.8
3.7
12 6 0 ft 6 12
3.7 1.8 0 m 1.8 3.7
SIDE VIEW
0 ft
9
0 m
2.7
TOP VIEW
12
6
0
ft
6
12
3.7
1.8
0
m
1.8
3.7
T568B pin/pair assignment is recommended for all CAT-5e cables. Sensor power is provided via the CAT-5e connection to an nLight power pack/supply, nLight-enabled digital luminaire, or
nLight Bridge.
*Note: A green wire is available for an optional connection to an approved ground. This wire is
isolated from the class 2 circuitry of the sensor. Connection will provide improved network
protection in case of accidental landing of line voltage to VIOLET or GRAY dimming wires. If an
approved ground is not available the green wire should be capped.
nPP16
LOAD
CAT-5e
120 V
277 V
-
-
BLK
ORN
CAT-5e
nCM 9 ADC
nCM 9 & nCM 9 ADCX
COVERAGE PATTERN