Cut Sheet

Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: [phone] www.acuitybrands.com
© 2014-2019 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/07/19
LSXR FAMILY
9 of 9
• To mount, push the unit's threaded chase nipple through a 1/2”
knockout (7/8" hole) in a fixture.
• A snap lock mechanism on the chase nipple will secure the sensor.
• To interchange lenses, pry out installed lens using a small flat screw
driver inserted into one of the slots shown below
• Apply light pressure on lens frame sides to snap in new lens.
• Install lens with the most optimum coverage pattern for a particular
space and application
• Masking labels are included with the high bay 360º lens to mask off
a portion of its coverage pattern for end-of-aisle, or to trim the side
viewing to create a rectangular pattern for center-of-aisle.
• Masking labels are included with the high bay aisle way lens to mask
off a portion of its coverage pattern for end-of-aisle applications.
REMOVING LENS
HIGH MOUNT 360º MASKING KIT
Center-of-Aisle
End-of-Aisle
Programming
Button
Screwdriver Slot
Screwdriver Slot
LED Location
HIGH MOUNT AISLEWAY MASKING KIT
End-of-Aisle
INSTALLATION