Cut Sheet

ManualsBrandsSensor Switch ManualsHigh Bay Occupancy SensorsHIGH BAY 360 SENSOR - FIXTURE MOUNT INTERCHANGEABLE LENS LINE VOLTAGE PASSIVE INFRARED

Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitybrands.com

LSXR FAMILY

1 of 9

LSXR Family

Fixture Mount Sensor

ORDERING INFORMATION

LSXR Single Relay Example: LSXR 610 ADC HVOLT J100

Series Lens Options Dimming/Photocell Voltage

LSXR Passive

Infrared Indoor

Occupancy

Sensor

Single Lens Multi-Lens

0 No Lens 610 High & Low Mount 360º

6 High Mount 360º 650 High Mount 360º & Aisleway

10 Low Mount 360º 3PK High & Low Mount 360º, & Aisleway

50 High Mount Aisleway 4PK All Lenses

9 Small Motion 360º

[blank] None

HL High/Low Occupancy Operation

P Switching Photocell (On/Off)

ADC Dimming & Switching Photocell

ANL Dimming & Switching Photocell with

High/Low Occ. Operation

[blank] 120-277 VAC

(MVOLT)

HVOLT 347-480 VAC

480 480 VAC

Catalog Number: Date: Project:

Additional Ordering Options

Visible Light

Programming Max Dim Level

Min Dim Level

Lead Length

Temp / Humidity Default Time Delay

Pack Qty

[blank] None

VLP Visible Light

Programming

[blank] 10 VDC

9H 9 VDC

8H 8 VDC

7H 7 VDC

[blank] Min 4V 4 VDC

1V 1 VDC 5V 5 VDC

2V 2 VDC 6V 6 VDC

3V 3 VDC

[blank] 8”

42L 42”

[blank] None

LT Low

Temp

[blank]

10 min (w/ 15 min minimum on time)

5M 5 min (LED only)

15M 15 min

20M 20 Min

30M 30 Min

[blank] Single

J100 100

Pack

OVERVIEW

The LSXR Family of xture mount occupancy sensors provides reliable and versatile solutions for

commercial and industrial lighting control applications. All LSXR Family sensors utilize passive infrared

(PIR) detection and feature interchangeable lenses, providing exibility for multiple mounting height and

coverage pattern requirements. Available options include dual relays, HVOLT powering, and an integrated

switching / dimming photocell.

All LSXR Family sensors utilize 100% digital Passive Infrared (PIR) detection and power from / switch line

voltage. Available options include dual relays, HVOLT powering, and an integrated switching / dimming

photocell.

FEATURES

• Four interchangeable lenses - high mount 360º, low mount 360º, high mount aisleway, and small

motion 360º

• Integrated mounting bracket drops lens down 3” from chase nipple - no bracket accessory required

• 100% digital PIR detection - provides excellent RF immunity

• No PIR eld calibration or sensitivity adjustments required

• Single or dual relay versions - designed with robust protection from the harsh switching requirements of

T5 uorescent and LED loads

• Powers from single or two-phase line connections

• Reversible hot & load wires - eliminates backwards wiring

• Photocell and 0-10 VDC dimming options

• Digital push-button programming - no tools or analog adjustments required

• Non-volatile settings memory

• Convenient test mode - quickens initial walk and/or photocell testing

• Green LED indicator

• LampMaximizer® minimum on timer (15 min) enables usage of shorter occupancy time delays while

protecting uorescent lamp life

• Default 10 minute occupancy time delay

Warranty

Five-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Note: Actual performance may differ as a result of end-user environment and application.

Specications subject to change without notice

1. Not available with HL, ADC or ANL options

2. Available in 100 packs only. Please allow additional time for rmware development

Summary of content (9 pages)

PAGE 1
Catalog Number: Date: Project: OVERVIEW The LSXR Family of fixture mount occupancy sensors provides reliable and versatile solutions for commercial and industrial lighting control applications. All LSXR Family sensors utilize passive infrared (PIR) detection and feature interchangeable lenses, providing flexibility for multiple mounting height and coverage pattern requirements. Available options include dual relays, HVOLT powering, and an integrated switching / dimming photocell.
PAGE 2
ORDERING INFORMATION CONT.
PAGE 3
SPECIFICATIONS Electrical Input Ratings 120, 208-277V, 80 mA, 50/60Hz 347V, 60 mA, 50/60Hz 480V, 60 mA, 50/60Hz Output Ratings 120V 50/60Hz, 800W/6.67A - Standard Ballast, General Use, Electronic Ballast, Tungsten 208V 50/60Hz, 1040W/5.00A - Standard Ballast, General Use, Electronic Ballast, Tungsten 277V 50/60Hz, 1200W/4.33A - Standard Ballast, General Use, Electronic Ballast, Tungsten 120/208/277V, 1/4HP - Motor 347V 50/60Hz, 1500W/4.33A - Standard Ballast, General Use, Tungsten 480V 50/60Hz, 2400W/5.
PAGE 4
WIRING DIAGRAMS- SINGLE RELAY Single Phase Wiring LINE VOLTAGE INTERCHANGEABLE LENS FIXTURE MOUNT: SWITCHING AND DIMMING 120/277 VAC (MVOLT) LINE VOLTAGE INTERCHANGEABLE LENS FIXTURE MOUNT: SWITCHING AND DIMMING 347 VAC (HVOLT) FIXTURE BALLAST or LED DRIVER FIXTURE BALLAST or LED DRIVER 2 Phase Wiring LINE VOLTAGE INTERCHANGEABLE LENS FIXTURE MOUNT: SWITCHING AND DIMMING 208/240 VAC (MVOLT) LINE VOLTAGE INTERCHANGEABLE LENS FIXTURE MOUNT: SWITCHING AND DIMMING 480 VAC (HVOLT) FIXTURE BALLAST or LED DR
PAGE 5
WIRING DIAGRAMS- DUAL RELAY (E.G., LSXR XX 2P) Operational States for -DZ option Occupancy Low Daylight Med. Daylight High Daylight No Occ.
PAGE 6
COVERAGE PATTERNS 0m 0 ft 4.6 15 9.1 30 13.7 45 HIGH MOUNT 360º LENS (#6) Best choice for 15 to 45 ft (4.57 to 13.72 m) mounting heights • 15 to 20 ft (4.57 to 6.10 m) radial coverage overlaps area lit by a typical high bay fixture • Excellent detection of large motion (e.g. walking) up to a 35 ft (10.76 m) mounting height • Excellent detection of extra large motion (e.g. forklifts) up to a 45 ft (13.
PAGE 7
3. PROGRAMMING INSTRUCTIONS Operational settings can be changed via the push-button sequence outlined below (note the example used is for changing pole 1 occupancy time delay). 1. Dim to Off Time Delay Dual Zone Photocell Offset % Switch (Button) Mode Dimming Range Min 14x 2x 3x e.g., press 2x for Occupancy Time Delay (Pole 1) Occupancy Time Delay (Pole 2) 12x 4x 11x 5x (Low Trim) 10x Dimming Range Max (High Trim) 9x Restore Factory Defaults 4. 2.
PAGE 8
OPERATIONAL SETTINGS NOTE: (*) Indicates factory default (unless otherwise marked) 2 = Occupancy Time Delay (Pole 1) The length of time the sensor will keep the lights controlled by relay 1 on and at full bright after it last detects occupancy, assuming Minimum On Time (function 4) has been met. 1 2 3 4 5 Test Mode** 6 30 sec 7 2.5 min 8 5.0 min 9 7.5 min 10 10.0 min* 12.5 min 15.0 min 17.5 min 20.0 min 11 12 13 14 22.5 min 25.0 min 27.5 min 30.
PAGE 9
INSTALLATION • To mount, push the unit's threaded chase nipple through a 1/2” knockout (7/8" hole) in a fixture. • A snap lock mechanism on the chase nipple will secure the sensor. • To interchange lenses, pry out installed lens using a small flat screw driver inserted into one of the slots shown below • Apply light pressure on lens frame sides to snap in new lens.