Installation Guide

ManualsBrandsSensor Switch ManualsElectricalSmall Motion 360 Low Voltage Ceiling Mount Occupancy Sensor

Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitybrands.com/sensorswitch

CM Family

1 of 4

Catalog Number: Date: Project:

OVERVIEW

The CM family of ceiling mount occupancy sensors provide a range sensor solutions for

applications with nished ceilings (e.g. ceiling tiles, sheetrock, plaster). CM family sensors

utilize 100% digital Passive Infrared (PIR) detection and are available with several lens options,

providing exibility for multiple mounting height and coverage pattern requirements. Dual

technology (PDT) occupancy detection can also be added as an option for applications where

occupants are stationary for long periods of time. With optional ash programming via the

Sensor Switch Mobile App, the user can easily change time delay, on mode and

photocontrol settings.

FEATURES

• Congurable using the Sensor Switch Mobile App

• 360° coverage pattern

• Push- button programmable, adjustable time delays, and multiple operating modes

• 100 hr lamp burn-in timer

• No eld calibration or sensitivity adjustments required

• Convenient test mode

• Green LED indicator

Warranty

Five-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Note: Actual performance may differ as a result of end-user environment and application.

Specications subject to change without notice

US LISTED

ORDERING INFORMATION

CM Family Example: CM PDT 11 R LT

Series Detection Technology Coverage Type Relay Dimming

Visible Light

Programming Temp/Humidity

CM Ceiling

Mount

Sensor

[blank] PIR

PDT

Dual Technology

(PIR/Microphonics)

6 High Bay

360º

9 Small

Motion

360º

10 Large

Motion

360º

11 Hallway

[blank] None

R Low Voltage

Relay

[blank] None

D Occupancy

Controlled

Dimming

P Photocell

ADC

Photocell w/

Dimming

[blank] None

VLP

6-8’ Range

Flash

Programming

via the

Sensor Switch

Mobile App

[blank] Standard

LT Low Temp/

High

humidity

Notes

1. PDT option not available on CM 6 models

2. ADC option not available on CM 6 models

3. Must specify P or ADC if VLP is ordered and

must be within 5ft of sensor to program

CM PDT

Ceiling Mount

Occupancy Sensor

Summary of content (4 pages)

PAGE 1
Catalog Number: Date: Project: OVERVIEW The CM family of ceiling mount occupancy sensors provide a range sensor solutions for applications with finished ceilings (e.g. ceiling tiles, sheetrock, plaster). CM family sensors utilize 100% digital Passive Infrared (PIR) detection and are available with several lens options, providing flexibility for multiple mounting height and coverage pattern requirements.
PAGE 2
COVERAGE PATTERNS Small Motion 360º (Model # CM 9/ CM PDT 91) • Best choice for small motion (e.g. hand movements) detection • 360º conical shaped pattern • Provides 12 ft (3.66 m) radial coverage (~500 ft2) when mounted to standard 9 ft (2.74 m) ceiling • 8 to 15 ft (2.44 to 4.57 m) mounting heights provide 10 to 20 ft (3.05 to 6.
PAGE 3
WIRING (DO NOT WIRE HOT) STANDARD WIRING RED - Power Input (12-24 VAC/VDC) BLACK - Common WHITE - Occupancy State (high VDC for occupied) PP20 BLK - 120 V ORN - 277 V R - RELAY OPTION PHOTOCELL / DIMMING OPTIONS (D, P, ADC) BLUE - Direct output to power pack for providing photocell control and/or secondary dim time out. Output is high VDC with occupancy & low light. Output also held high during secondary dim time out.
PAGE 4
SPECIFICATIONS Electrical Input Ratings Class 2 Input 24V max, 4mA Class 2 Input 24V max, 16mA (-R Option) Relay Type Electrically held Low Voltage Output Ratings 0-10VDC, Sinks <20mA Standards/ Ratings Energy Management Equipment, UL916 (E167435) Mechanical Dimensions 4.55”W x 1.