Manualshelf

User Manual

ManualsBrandsSensize ManualsElectronicsSensize Tracker v2 CAT-M
41424344454647484950
Table Of Contents
SARA-R4 series-AT commands manual
UBX-17003787 - R16
7Network service
Page 41 of 401
7Network service
7.1Network parameters definition
Parameter Type Description Commands
<MCC> Number Mobile Country Code. The range is 0-999 (3 digits).
• SARA-R4 - The FFF value is to be considered not
known or not detectable
+COPS, +UCGED
<MNC> Number Mobile Network Code. The range is 0-999 (1 to 3
digits).
• SARA-R4 - the FFF value is to be considered not
known or not detectable
+COPS, +UCGED
<LAC> Number Location Area Code, The range is 0x0-0xFFFF (2
octets)
+COPS
<CI> Number Cell identity. +COPS
<RxLev> Number Received Signal Strength Indicator (RSSI) index as
defined in 3GPP TS 45.008 [25]:
• 0: less than -110 dBm
• 1..62: from -110 to less than -48 dBm with 1 dBm
steps
• 63: -48 dBm or greater
+COPS, +UCGED
<RAC> Number Routing Area Code, range 0h-FFh (1 octet); see the
3GPP TS 44.018 [136]
+COPS
<scrambling_code> Number Scrambling code. +COPS, +UCGED
<dl_frequency> Number Downlink frequency. The range is 0-16383. +COPS
<ul_frequency> Number Uplink frequency. The range is 0-16383. +COPS
<arfcn> Number Absolute Radio Frequency Channel Number
(ARFCN).
+COPS, +UCGED
<rscp_lev> Number Received Signal Code Power expressed in dBm
levels:
• 0: less than -115 dBm
• 1..90: from -115 dBm to less than -25 dBm with 1
dBm steps
• 91: -25 dBm
+COPS
<ecn0_lev> Number Energy per Chip/Noise ratio expressed in dB levels:
• 0: less than -24 dB
• 1..48: from -24 dB to less than 0 dB with 0.5 dB
steps
• 49: 0 dB
+COPS, +UCGED
<EARFCN> Number E-UTRAN Absolute radio frequency channel
number.
+UCGED, +VZWRSRQ
<PhysCellID> Number Physical cell ID. The range is 0-503. +COPS
<TAC> Number Tracking area code.
• SARA-R4 - The range is 0-0xFFFF (2 octets),
FFFF if not known or not detectable
+COPS, +UCGED
<LcellId> Number E-UTRAN CI (cell identifier) in hexadecimal format;
the range is 0h-FFFFFFFh (28 bits), 0000000 if not
known or not detectable.
+UCGED
<dl_EARFCN> Number Downlink E-UTRAN absolute radio frequency
channel number in decimal format.
+COPS
<ul_EARFCN> Number Uplink E-UTRAN absolute radio frequency channel
number in decimal format.
+COPS
<RSRP> Number Reference Signal Received Power (RSRP) as defined
in 3GPP TS 36.133 [83]:
• 0: less than -140 dBm
• 1..96: from -140 dBm to less than -44 dBm with 1
dBm steps
• 97: -44 dBm or greater
+COPS, +UCGED