Manualshelf

User Manual

ManualsBrandsSensize ManualsElectronicsSensize Tracker v2 CAT-M
31323334353637383940
Table Of Contents
SARA-R4 series-AT commands manual
UBX-17003787 - R16
5Mobile equipment control and status
Page 35 of 401
Type Syntax Response Example
<disp>'s),(list of supported <ind>'s),
(list of supported <bfr>'s)
OK
URC +CIEV: <descr>,<value>
5.6.3Defined values
Parameter Type Description
<mode> Number Allowed values:
• 0 (default value): buffer URCs in the MT
• 1: discard URCs when the V.24 interface is reserved for data; otherwise directly
display them on the DTE
• 2: buffer URCs in MT when the V.24 interface is reserved and flush them after
reservation; otherwise directly display them on the DTE
• 3: same as 1
<keyp> Number Allowed values:
• 0: no keypad event reporting
<disp> Number Allowed values:
• 0: no display event reporting
<ind> Number Allowed values:
• 0: no indicator event reporting
• 1: indicator event reporting using the +CIEV URC. Only the indicator events which
are not caused by +CIND shall be indicated by the MT to the DTE.
• 2: indicator event reporting using the +CIEV URC. All the indicator events shall be
directed from MT to DTE.
<bfr> Number Allowed values:
• 0: MT buffer of URCs defined within this command is cleared when <mode> 1...3 is
entered
• 1: MT buffer of URCs defined within this command is flushed to the DTE when
<mode> 1...3 is entered (the OK final result code shall be given before flushing the
codes).
<descr> Number Indicates the indicator order number. The name in the brackets indicates the
corresponding <descr> parameter of +CIND; <value> is the new value of indicator:
• 1 ("battchg"): <value> provides the battery charge level (0-5)
• 2 ("signal"): <value> provides the signal level
o 0: < -105 dBm
o 1: < -93 dBm
o 2: < -81 dBm
o 3: < -69 dBm
o 4: < - 57 dBm
o 5: >= -57 dBm
• 3 ("service"): <value> provides the network service availability:
o 0: not registered to the network
o 1: registered to the network
• 4 ("sounder"): <value> provides the sounder activity:
o 0: no sound
o 1: sound is generated
• 5 ("message"): <value> provides the unread message available in <mem1> storage:
o 0: no messages
o 1: unread message available
• 6 ("call"): <value> provides the call in progress:
o 0: no call in progress
o 1: call in progress
• 7 ("roam"): <value> provides the registration on a roaming network:
o 0: not in roaming
o 1: roaming
• 8 ("smsfull"): <value> provides the SMS storage status:
o 0: SMS storage not full