Manualshelf

User Manual

ManualsBrandsSensize ManualsElectronicsSensize Tracker v2 CAT-M
21222324252627282930
Table Of Contents
SARA-R4 series-AT commands manual
UBX-17003787 - R16
4General
Page 27 of 401
Parameter Type Description
<type_number> String Product type number
<ordering_code> String Product ordering code
<modem_version> String Module modem version
<FW_rel_date> String Firmware release date and time
<applications_
version>
String Module application version. Where not applicable the module provides "Undefined"
<SVN> String Software Version Number
<IMEI> String International Mobile Equipment Identity (IMEI) of the MT
<module_boot_
sequence_version>
Number Module boot sequence version. Where not applicable the module provides
"Undefined"
4.9.4Notes
SARA-R404M / SARA-R410M-01B / SARA-R410M-02B / SARA-R410M-52B / SARA-R412M / SARA-N4
• The ATI and ATI0 commands return the product ordering code instead of the product type number.
4.10TE character set configuration +CSCS
+CSCS
Modules All products
Syntax PIN required Settings saved Can be aborted Response time Error referenceAttributes
full No Profile No - +CME Error
4.10.1Description
Selects the TE character set.
The selected character set is used for encoding/decoding of only the AT commands' string type
parameters whose description explicitly references the +CSCS setting itself.
SARA-R4 / SARA-N4
The command setting is not stored in the profile.
4.10.2Syntax
Type Syntax Response Example
Set AT+CSCS=<chset> OK AT+CSCS="IRA"
OK
Read AT+CSCS? +CSCS: <chset>
OK
+CSCS: "IRA"
OK
Test AT+CSCS=? +CSCS: (list of supported <chset>'s)
OK
+CSCS: ("IRA","GSM","PCCP437",
"8859-1","UCS2","HEX", "PCCP936")
OK
4.10.3Defined values
Parameter Type Description
<chset> String Allowed characters set:
• "IRA" (factory-programmed value): International Reference Alphabet (ITU-T T.50)
• "GSM": GSM default alphabet (3GPP TS 23.038)
• "PCCP437": PC character set Code Page 437
• "8859-1": ISO 8859 Latin 1 character set
• "UCS2": 16-bit universal multiple-octet coded character set (USO/IEC10646); UCS2
character strings are converted to hexadecimal numbers from 0000 to FFFF; e.g.
"004100620063" equals three 16-bit characters with decimal values 65, 98 and 99
• "HEX": character strings consist only of hexadecimal numbers from 00 to FF; e.g.
"032FE6" equals three 8-bit characters with decimal values 3, 47 and 230; no
conversions to the original MT character set shall be done
• "PCCP936": Chinese character set
Allowed values: