Manualshelf

User Manual

ManualsBrandsSensize ManualsElectronicsSensize Tracker v2 CAT-M
151152153154155156157158159160
Table Of Contents
SARA-R4 series-AT commands manual
UBX-17003787 - R16
13Packet switched data services
Page 155 of 401
13.16.3Defined values
Parameter Type Description
<cid> Number See <cid>.
<APN> String See <APN>.
<bearer_id> Number Identifies the bearer, i.e. the EPS bearer in EPS and the NSAPI in UMTS/GPRS. The
range goes from 5 to 16.
<local_addr_and_
subnet_mask>
String IP address and subnet mask of the MT. The string is given as dot-separated numeric
(0-255) parameters on the form:
• "a1.a2.a3.a4.m1.m2.m3.m4" for IPv4
• "a1.a2.a3.a4.a5.a6.a7.a8.a9.a10
.a11.a12.a13.a14.a15.a16.m1.m2.m3.m4.m5.m6.m7.m8.m9.m10
.m11.m12.m13.m14.m15.m16" for IPv6
<gw_addr> String Gateway address of the MT. The string is given as dot-separated numeric (0-255)
parameters.
<DNS_prim_addr> String IP address of the primary DNS server.
<DNS_sec_addr> String IP address of the secondary DNS server.
<P-CSCF_prim_
addr>
String IP address of the primary P-CSCF server.
<P-CSCF_sec_addr> String IP address of the secondary P-CSCF server.
<IM_CN_Signalling_
Flag_Ind>
Number Shows whether the PDP context is for IM CN subsystem-related signalling only or not:
• 0: PDP context is not for IM CN subsystem-related signalling only
• 1: PDP context is for IM CN subsystem-related signalling only
<LIPA_indication> Number Indicates that the PDP context provides connectivity using a LIPA PDN connection.
This parameter cannot be set by the TE:
• 0: indication not received that the PDP context provides connectivity using a LIPA
PDN connection
• 1: indication received that the PDP context provides connectivity using a LIPA PDN
connection
<IPv4_MTU> Number Provides the IPv4 MTU size in octets.
<WLAN_offload> Number Indicates whether the traffic can be offloaded using the specified PDN connection
via a WLAN or not. This refers to bits 1 and 2 of the WLAN offload acceptability IE as
specified in 3GPP TS 24.008 [12] subclause 10.5.6.20. Allowed values:
• 0: offloading the traffic of the PDN connection via a WLAN when in S1 mode or when
in Iu mode is not acceptable
• 1: offloading the traffic of the PDN connection via a WLAN when in S1 mode is
acceptable, but not acceptable in Iu mode
• 2: offloading the traffic of the PDN connection via a WLAN when in Iu mode is
acceptable, but not acceptable in S1 mode
• 3: offloading the traffic of the PDN connection via a WLAN when in S1 mode or when
in Iu mode is acceptable
<Local_Addr_Ind> Number Indicates whether or not the MS and the network support local IP address in TFTs
(see 3GPP TS 24.301 [68] and 3GPP TS 24.008 [12] subclause 10.5.6.3). Allowed
values:
• 0: indicates that the MS or the network or both do not support local IP address in
TFTs
• 1: indicates that the MS and the network support local IP address in TFTs
13.16.4Notes
SARA-R4 / SARA-N4
• The <IM_CN_Signalling_Flag_Ind>, <LIPA_indication>, <IPv4_MTU>, <WLAN_offload> and <Local_Addr_
Ind> parameters are not supported.
• The <local_addr_and_subnet_mask> do not include the MT subnet mask.