Manualshelf

User Manual

ManualsBrandsSensize ManualsElectronicsSensize Tracker v2 CAT-M
131132133134135136137138139140
Table Of Contents
SARA-R4 series-AT commands manual
UBX-17003787 - R16
13Packet switched data services
Page 136 of 401
Parameter Type Description
o 2: class 2 (GTP Unack, LLC Ack and Protected, RLC Ack)
o 3: class 3 (GTP Unack, LLC Unack and Protected, RLC Ack)
o 4: class 4 (GTP Unack, LLC Unack and Protected, RLC Unack)
o 5: class 5 (GTP Unack, LLC Unack and Unprotected, RLC Unack)
o 6: class 6 (Interpreted as class 3)
• 13: QoS peak rate - the <param_val> parameter selects the peak throughput in
range 0-9. The default value is 0.
• 14: QoS mean rate - the <param_val> parameter selects the mean throughput in
range 0-18, 31. The default value is 0.
• 15: minimum QoS precedence - the <param_val> parameter selects the acceptable
value for the precedence class:
o 0 (default value): subscribed
o 1: high
o 2: normal
o 3: low
• 16: minimum QoS delay - the <param_val> parameter selects the acceptable value
for the delay class:
o 0 (default value): subscribed
o 1: class 1
o 2: class 2
o 3: class 3
o 4: best effort
• 17: minimum QoS reliability - the <param_val> parameter selects the minimum
acceptable value for the reliability class:
o 0 (default value): subscribed
o 1: class 1 (Interpreted as class 2)
o 2: class 2 (GTP Unack, LLC Ack and Protected, RLC Ack)
o 3: class 3 (GTP Unack, LLC Unack and Protected, RLC Ack)
o 4: class 4 (GTP Unack, LLC Unack and Protected, RLC Unack)
o 5: class 5 (GTP Unack, LLC Unack and Unprotected, RLC Unack)
o 6: class 6 (Interpreted as class 3)
• 18: minimum QoS peak rate - the <param_val> parameter selects the acceptable
value for the peak throughput in range 0-9. The default value is 0.
• 19: minimum QoS mean rate - the <param_val> parameter selects the acceptable
value for the mean throughput in range 0-18, 31. The default value is 0.
• 20: 3G QoS delivery order - the <param_val> parameter selects the acceptable value
for the delivery order:
o 0 (default value): subscribed
o 1: enable
o 2: disable
• 21: 3G QoS erroneous SDU delivery - the <param_val> parameter selects the
acceptable value for the erroneous SDU delivery:
o 0 (default value): subscribed
o 1: no detection
o 2: enable
o 3: disable
• 22: 3G QoS extended guaranteed downlink bit rate - <param_val> is the value for
the extended guaranteed downlink bit rate in kb/s. The default value is 0.
• 23: 3G QoS extended maximum downlink bit rate - <param_val> is the value for the
extended maximum downlink bit rate in kb/s. The default value is 0.
• 24: 3G QoS guaranteed downlink bit rate - <param_val> is the value for the
guaranteed downlink bit rate in kb/s. The default value is 0.
• 25: 3G QoS guaranteed uplink bit rate - <param_val> is the value for the guaranteed
uplink bit rate in kb/s. The default value is 0.
• 26: 3G QoS maximum downlink bit rate - <param_val> is the value for the maximum
downlink bit rate in kb/s. The default value is 0.
• 27: 3G QoS maximum uplink bit rate - <param_val> is the value for the maximum
uplink bit rate in kb/s. The default value is 0.
• 28: 3G QoS maximum SDU size - <param_val> is the value for the maximum SDU
size in octets. The default value is 0.