User's Manual

T11012860 User Manual

2. Physical Appearance

2.1. User Interface

The user interface consists of the following:

1. Three LEDs (red, green, blue)

2. Two buttons(Start/Stop)

3. One LCD Display

2.1.1. LEDs

The LEDs are intended to allow quick and easy-to-read status to be conveyed to the

end user. The user can immediately know the status of the unit during startup and

operation.

2.1.1.1. System Startup Sequence

During startup, and If configured the Green LED blinks at 1hz for 4 secs.

2.1.2. Buttons

There are two buttons on the device:

1. Start – a configurable press delay is added, usually configured to be held for

three second before it starts.

2. Stop– a configurable press delay is added usually configured to be held for

three seconds before it stops.