USER MANUAL For Model T11012920 NOTICE OF PROPRIETARY PROPERTY This document and the information contained in it are the proprietary property of Sensitech. It may not be copied or used in any manner nor may any of the information in or upon it be used for any purpose without the express written consent of an authorized agent of Sensitech Inc.
REVISION HISTORY: REV 0.1 0.
Table of Contents 1. 2. 3. 4. 5. Introduction ............................................................................................................... 4 1.1. Purpose ......................................................................................................... 4 1.2. Scope............................................................................................................. 4 1.3. Description .........................................................................................
1. Introduction 1.1. Purpose This document describes the usage of a T11012920 (marketing name TBD) device. 1.2. Scope The intended audience is a valued customer. 1.3. Description The T11012920 is a sub-gigahertz environmental data logger designed to provide monitoring capabilities in mobile and stationary use cases. The following is a brief summary of its features: 1. 868/915 MHz radio communication 2. Internal battery 3. Temperature Sensor 4. Humidity Sensor 5. Light Sensor 6.
2. Physical Appearance 2.1. User Interface The user interface consists of the following: 1. Three LEDs (red, green, blue) 2. One button 2.1.1. LEDs The LEDs are intended to allow quick and easy-to-read status to be conveyed to the end user. The user can immediately know the current status of the unit during startup and operation. The LEDs will turn on for five seconds due to a button press. 2.1.1.1. Status During startup, the blue LED on the status group will blink rapidly.
3. Using the Device The usage of the device is intended to be simple and transparent to a customer’s process. To start a device, press the button for > 1 second. Once started, ensure no LEDs are red. If all LEDs are green, then that means the system is in good health, the cellular connection is in good coverage and stable, and that at least one sensor is communicating with the gateway. © SENSITECH INC.
4. Software This unit reports data over the cellular network. This data is accessible via several web-based platforms that target various industries. Please contact customer support for more information. © SENSITECH INC.
5. Disclaimers RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Do not dispose battery along with household waste. Do not dispose in a fire or hot oven, mechanically crush or cut the battery. Doing so can result in explosion. There are no user serviceable parts inside, battery cannot be replaced by the end user, and will result in damaging device.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Leprésent appareil est conforme aux CNR d'Industrie Canada applicable aux appareils radio Exempts de licence.
