User's Manual

© SENSITECH INC. CONFIDENTIAL – CONTROLLED DOCUMENT Page 13 of 83
A Carrier Corp. Company
PART NUMBER T82002163
REV A
Device Hardware Structure
General Hardware Information
Electrical Specification
1.1 SWITCHING POWER SUPPLY
Input Voltage: AC 100~240V
Frequency:50/60Hz
Input Current: 1500mA.
Output Voltage: DC 15V
Output Current: DC 4000mA
1.2 DC Input: 12-24V
* 15VDC Wall Adapter
* 12 VDC automobile DC adapter
* 24 VDC trailer truck DC adapter
1.2.1 Input current: 2-5A
1.2.2Power Consumption: approximately 15W
1.3. Charging
Max Charging Current:3A
Charging Voltage: 8.4V +/- 0.1V
Charging Time: 3.5hr
Discharging current: 2-6A
Discharging time: 3hr/2A
Environment Specification
Operating Temperature: 0-45°C
Storage Temperature: 0-45°C
Operating Humidity: 0-99%
Mechanical Specification
Cabinet Size: 270(L)*135(W)*110(H) mm
Weight: Approximately 1100g
Color: Grey
Mode of Operation
The user presses the platen release button on the unit to load a 50mm paper roll into the frontend of the
TripStripII unit. The user will then Power ON device using the POWER button on the Keypad.
SENSITECH, INC. window appears. Now, the user is able to navigate through the menus or
download/print a TempTale 4 monitor or TempTale Mini. A hand strap located on the rear of the unit
provides the user optimal portability support.LED status indicators are visible on the front end of the unit or
Power, LowBatt, Charging, and Paper out.