User's Manual

Page 10 of 83

A Carrier Corp. Company

PART NUMBER T82002163

REV A

User Interface

Power Charge Paper Out Low Batt

User presses the Power Button and the unit is powered ON and the Power LED is ON. The

Sensitech application program appears momentarily. The user is now able to download any TT4 (2k/16k)

or TTmini; except TT4 USB. To download a TT4 unit, the user may place a TT4 on the optical interface

and press START. To download a TTmini, the user may connect the TTmini to the RS232 DB9 connector

and press START.

Once the user presses START, the TSII auto-detects which UART to begin downloading from.

The summary data will appear first and the unit will begin printing (if option is enabled via Menu), then the

user will have an option of displaying the graph on the LCD by pressing the ENTER key which defaults to

Auto Scale Mode. The user will have the ability to Zoom In/Out of the graph. Zoom interval will be Max

Trip Length / 5, regardless of the EEPROM size or monitor type.

Please note: For the ZOOM feature, no matter what type of monitor or EEPROM size, the TSII

will take the max trip length and divide it by 5. However, please note due to the resolution, if the monitor

data size is less than (approximately) 512K then this will not apply. The user will only see the graph screen

and will not be able to ZOOM. (If the EEPROM has more than or equal to 64 points then it will have the

zoom feature).