Installation Guide

SLS LED Recessed/Surface Mount Puck Light
1
Drill a 2 1/4” (57mm) hole
2
Feed driver lead through hole
3
Press lamp into hole (go to step 5)
A) Recess Mount for Inside Cabinet Top or Double-Walled Cabinet Bottom
1
Drill a 3/8”-7/16” (9-10mm) hole for
driver lead
Mount fixture ring with screws
2
3
Thread lead through hole (go to step 4)
B) Surface Mount Cabinet Top
C) Surface Mount Cabinet Bottom
2
Mount fixture ring with screws (go to step 4)
Thread driver lead through lead notch
1
Sensio America
877-501-5337
www.sensioamerica.com
• Ensure that the power is disconnected prior to cleaning.
• To keep the finish of this product, wipe over with soft cloth
periodically.
• Do not use harsh chemical solvents, it may discolor or
damage the finish.
Maintenance & Care
Support
4
Press lamp into ring
5
Run lead to driver
LED Power
Supply
Distributo
r
6
Connect driver to power
Final Steps (FS)
Mounting Options