Installation Guide

Flexible 11.81" 0.8W 12 Diode Strip Light
Installation
Sensio America
877-501-5337
www.sensioamerica.com
• Ensure that the power is disconnected prior to cleaning.
• To keep the finish of this product, wipe over with soft cloth
periodically.
• Do not use harsh chemical solvents, it may discolor or
damage the finish.
Maintenance & Care
Support
Drill 5/16" hole in bottom front
corner.
1
12
Connect driver to power.
Connect to driver.
10
Staple wire in place along inside front
edge of cabinet (optional).
11
Determine placement (front, center,
or back) and use pencil to draw line.
2
Measure line drawn. Clean surface
with rubbing alcohol and let dry.
3
Feed driver lead wire through hole up
along inside front corner of cabinet.
8
Adhere strip along line, driver lead on
side of drilled hole.
7
Feed driver lead to LED driver.
9
Cut excess off on scissor line
indicator.
5
Determine how many strips needed
and plug together (remove cap).
4
Attach driver lead into strip. Peel off
backing.
6
(FRONT OF CABINET)