User's Manual


SPM-U User Manual
Safety Instructions
■ The device should be located away from heat sources such as radiators, heat, or other
products that produce heat.
■ Do not expose the device to high temperature or leave it in direct sunlight. Doing so may
damage the device.
■ Do not place device in excessive dust or vibration places.
■ Avoid all contact with water, and dry hands before using. (This product is not waterproof.)
■ Keep the device out of the reach of infants.
■ Do not insert any object into any of the device’s openings because there may be a risk of
electric shock.
■ While pulling/plugging the power cord, keep your hand dry. Should hold plug tie and then
pulling.
■ Read and understand this safety instructions manual before using device ; Otherwise
company does not take responsibility for the damages.
■ Do not drop, puncture or disassemble the device; Otherwise the warranty will be voided.
■ Due to operator error, power blacked out or caused by external factors result the economic
loss, the Company is not responsible for above situations.
■ This product is build-in line with standard plug and socket. The connected load do not
exceed s50V/10A.
Installation
■ Follow the diagrams below to install the unit:
2. Drill two holes on
the wall according to
the guide.
3. Place the screw an-
chors into the holes.
4. Place the screw onto the anchor
and use a screw driver to fasten it.
5. Hang the unit onto the screws.
1. Paste the instruction
guide on the wall.