Quick Start Guide

5 6 7 8
Note: A cloud account is not needed to use the Seguro
120 temperature data logger.
Connecting to the Device
For Android Devices:
Once the Seguro app is installed, simply touch the
Seguro device to the back of the phone (usually near the
top of the phone) and the app will open automatically,
then the device screen will open.
For Apple (iOS) Devices:
Open the Seguro app, and tap the Connect to Device
button on the home screen. A “Ready to Scan” window
will appear at the bottom of the screen. Hold the Seguro
device next to the back of the phone until the phone
beeps and/or vibrates. The exact location of the NFC
reader in the phone may vary somewhat, but it is usually
near the top of the phone. Once the app recognizes the
device, the Device screen will open.