User Manual

7
Mechanical interface
(all dimensions in inches unless otherwise noted)
Top side module height: max 0.255”
Bottom side module height: max 0.149”
The OEM200 is a printed circuit board (PCB) assembly with two connectors (J1 and J3) and three mounting
holes. The primary interconnection is J1, the 41 position board to board, connector on the bottom of the
assembly. When loaded into its mating connector on a carrier board, the bottom of the OEM100’s PCB will
be 4.3mm (0.169 inches) from the top of that carrier board. The mounting holes are designed to accommodate
4mm tall, board to board, plastic, stacking posts also on the bottom side (e.g. Richco p/n MDLSP1-04M-01).
Alternatively, #2, nylon fasteners may be used.