User Manual
10
Appendix A
Developer’s Kit Adapter Board
Optionally a Sensicast Developer’s Kit Adapter Board (P/N 1408) can be used to ease prototyping with the
OEM100/200. There are .104” diameter mounting holes that correspond to the mounting holes of the
OEM100/200. The board has a Hirose receptacle that mates with the OEM100’s 41 position header. Each
signal is brought to a test point arranged on a 2mm grid.
Some of the more commonly used signals are brought to three other connectors (P1, P2 and P3) for ease of
integration with a microcontroller based target board. A multicolor ribbon cable the mates with J1 is also
provided. There is a 3.3V regulator that allows the user to power the OEM100/200 from an AC power
adapter. Here is a drawing of the adapter board and a description of the connectors and their signals
If the optional target developer’s board is being used, the I2C and jumper wires included are compatible with
P2 and P3.