User Manual

MESH AND BRIDGE NODES
www.sensicast.com
2
22
2-
--
-2
22
2
Power Supply
The power supply is a 120VAC/60Hz in, 6V DC out adapter that is used as the primary power
source for the Mesh/Bridge node.
Serial Cable
The serial cable includes a stereo jack on one end and a standard DB9 connector on the other
end. The stereo jack can be plugged into the node, while the DB9 connector can be plugged
into a PC serial port.
Note
The serial cable is an option on the Mesh node; it is standard on the Bridge
node.