User Manual

MESH AND BRIDGE NODES
www.sensicast.com
2
22
2-
--
-8
88
8
DC IN
The DC IN is a barrel connector designed to accept the connector on the Sensicast 6V DC
power supply. The center conductor is positive; the outer conductor is ground.
Note
 Be careful not to insert the power connector into the serial jack.
Stereo Jack 10101
The 10101 stereo jack is designed to accept the stereo plug on Sensicast serial cable.
Note
The serial cable is an option on the Mesh node; it is standard on the Bridge
node.