Owners manual

4
User interface description
The user interface and control
capabilities include the following
features:
1. ON/OFF and energy selection button
• Single button used for the device
activation, deactivation, and energy
selection.
• Pressing the button (after the device is
connected to the power supply) will turn
the device on at energy level 1. Each press
will change the energy, from the lower
level to the higher, for a total of 3 different
energy levels.
• The device will switch to standby mode
when left unattended or by pressing the
ON/OFF button for 3 seconds.
2. Trigger button (flash pulse activation)
marked as a “sun” on the upper side of the
Device. The trigger button will activate the
flash lamp if the treatment window is in full
contact with the skin, and the skin tone is
in the allowed range. Pressing the button
once will activate a single pulse, pressing
and holding the button will activate pulses
continuously as long as the button pressed.