Mini my permanent hair reduction User Guide
Table of contents What is sensiLight™ Mini 2 RPL (Reactive Pulsed Light)™ technology - How does it work 2 Long-term hair reduction – Hair growth cycle 2 sensiLight™ Mini device description 3 Handheld description 3 User interface description 4 Who should use and how to decide to use sensiLight™ Mini 6 When shouldn’t sensiLight™ Mini be used 6 Who cannot use the sensiLight™ Mini - CONTRAINDICATIONS 6 What you must do to avoid serious harm - WARNINGS 7 What you must do to avoid other harm
What is sensiLight™ Mini The sensiLight™ Mini device is an over-thecounter device intended for the removal of unwanted hair. The sensiLight™ Mini is also intended for permanent reduction in hair regrowth, defined as a long-term, stable reduction in the number of hair regrowing when measured at 6, 9, and 12 months after the completion of treatment regimen. RPL (Reactive Pulsed Light)™ technology - How does it work The sensiLight™ Mini is based on the scientific principle of selective photothermolysis.
sensiLight™ Mini device description The sensiLight™ Mini package consists of the following main components: • sensiLight™ Mini handheld device • External power supply Handheld description 1-3 energy level lights ON/OFF button and energy level button Power supply socket 4 1 6 Skin tone and contact sensor (Fitzpatrick sensor) 5 7 8 Treatment window Lamp Trigger button 2 3 Status indicator: · Lack of contact · Non-allowed skin tone · Device not usable 3
User interface description The user interface and control capabilities include the following features: 1. ON/OFF and energy selection button • Single button used for the device activation, deactivation, and energy selection. • Pressing the button (after the device is connected to the power supply) will turn the device on at energy level 1. Each press will change the energy, from the lower level to the higher, for a total of 3 different energy levels.
Indicator Mode No light OFF Device not working (not connected to the power supply). “Blinking” green light Standby Device is in standby mode (before powering on or when left unattended for 3 minutes). 1-3 energy level lights green light Energy level 1-3 The three energy levels are indicated by three green LED lights. “Steady” green light ON Pulse is ready. "Momentary" orange light Activation (pulse) blocked The device does not deliver a pulse due to the lack of full skin contact.
Who should use and how to decide to use sensiLight™ Mini NEVER USE SENSILIGHT™ MINI AROUND OR NEAR YOUR EYES. • sensiLight™ Mini is intended for women and men who desire to remove unwanted hair. When shouldn’t sensiLight™ Mini be used • sensiLight™ Mini is intended for use on all treatment areas, such as the legs, underarms, bikini line, back and arms.
suffer from epilepsy, it could trigger seizure. • Do not use on damaged or broken skin or if you have a history of Herpes or Psoriasis outbreak in the treatment area since it can result serious side effects. • Do not use if you suffer from keloid scar (growth of extra scar tissue where the skin has healed after an injury) formation since it has not been established and may result serious skin complications.
• Never look directly at the light coming from the sensiLight™ Mini applicator and lamp as it may cause eye injury. • Never use flammable liquids such as alcohol (including perfumes, sanitizers, or other applications containing alcohol) or acetone to clean the skin one hour before using sensiLight™ Mini as it may cause burning of the skin. • Do not use the sensiLight™ Mini if you have an active implant such as a pacemaker, insulin pumps, or similar devices since it may cause interference.
• This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities. • Do not use the device if: • The device is not working properly, appears damaged or broken (UV and IR emitted from this device) Note: Do not share sensiLight™ Mini at any time, due to the possibility of transmitting diseases between users. Use sensiLight™ Mini only with its original power supply. For your safety, never use DC adapters which are not approved by the manufacturer.
Possible side effects When using the sensiLight™ Mini according to the instructions for use, side effects are rare. However, every aesthetic procedure including the usage of home use devices may cause some degree of side effects.
and, extremely rarely, may leave a visible permanent scar. • Scarring - In rare cases, permanent scarring may occur. Usually when scarring occurs it is in the form of a flat and white lesion on the skin (hypotrophic). However, it can be large and red (hypertrophic) or large and extend beyond the margins of the injury itself (keloid). Subsequent aesthetic treatments may be required to improve the appearance of the scar.
As an extra precaution, sensiLight™ Mini has been designed to only emit a light pulse when it is in contact with your skin. Response to sensiLight™ Mini hair reduction differs between individuals depending on biological factors and how closely treatment instructions are followed. Based on the treatment regime followed in the User’s Guide you should expect to see some improvement in 3-4 weeks. The hair will continue to grow up to two weeks after a hair reduction session.
User instructions sensiLight™ Mini is an optimal solution for all treatment areas, such as your underarms, bikini line, arms, back, shoulders, chest and legs. Device set-up 1. Remove all components from the box (handheld device and power supply). 2. Before beginning the treatment, make sure the device is clean, dry, and intact. 3. Plug the power supply end into an electrical outlet and the cord end into the device socket. The sensiLight™ Mini is now ready to be used. How to prepare yourself 1.
Preliminary test The preliminary test is intended to determine your skins reaction to the sensiLight™ Mini treatment and help you set the optimal energy level for each treatment area. Do a preliminary test on each area you intend to treat 48 hours prior to the full treatment. Note: Do not treat full areas with energy levels that you have not tested before! Do not treat the tested area for at least 48 hours after the preliminary test is done. 1.
preliminary test section). The energy level lights will light up green on the level scale according to the selected energy level. 4. Place the sensiLight™ Mini treatment window on the desired treatment area with full contact to the skin. If sensiLight™ Mini is not properly applied, the indicator will be “momentary” orange. If your skin tone is too dark/tanned, the indicator will be “momentary” red. In these cases, the sensiLight™ Mini will not trigger a pulse in that area of skin. 5.
Recommended treatment protocol Treatment areas depending on hair color and their treatment protocol Average Fitzpatrick Energy levels Treatment Treatment Hair color number of skin level area interval treatments Legs Light brown 1–4 inclusive to brown 1–3 Arms Underarms 10–12 Bikini lines Legs Brown to black 1–4 inclusive 1–3 Arms Underarms 8–10 The 1–4 treatments will be approximately two weeks apart, followed by four-weeks time intervals.
• Maintenance will be needed from time to time if growth is still visible. • You may use the treatment log at the end of this manual, in order to assist you with recording your specific treatments areas, dates and duration. What to expect when using sensiLight™ Mini During your hair removal treatment it is normal to experience: • A flash of light on each press of the activation bottom.
bathtubs, showers, basins or other vessels containing water as this may cause severe electrocution. • If you do not plan on using your sensiLight™ Mini for a long period of time, it is recommended to keep it clean and stored. • If you plan to travel and take your sensiLight™ Mini with you, you should store it in the original box and follow the maintenance instructions. Troubleshooting If you experience any problems with the sensiLight™ Mini, please refer to below information to try to resolve it.
• In case of a general error, reset the device – unplug the power cord from the electrical outlet on the wall, wait 10 sec and then reconnect it. • If you still have problems with your device, please contact our customer service. Customer service For more information about sensiLight™ Mini or if your sensiLight™ Mini is broken, quits working or you need more assistance, please contact us: @ 855-SENSICA (855-736-7422) support@sensica.
Device specification parameters Emitted light spectrum: 475 [nm] to 1,200 [nm] max. Storage instructions Storage and transport conditions Emitted energy flux: 5 [J/cm²] Temperature -10ºC to 70ºC (14ºF to 158ºF) Selectable energy levels: 3 levels Humidity 0 to 90% RH at 55ºC (131ºF) Pressure non-condensing Treatment area (window): 3 [cm²] Speed: 1 pulse every 3 seconds 1 [cm²] External power supply: 12 [V], 1.8 [A] 100–240 VAC, 50–60Hz Device size and weight: 7.8 [Oz], 5.3X1.77X2.
Electromagnetic compatibility (EMC) and Specifications • The SensiLight™Mini needs special precautions regarding EMC and needs to be installed and put into service according to the EMC information provided. • Portable and mobile RF communications equipment can affect SensiLight™Mini. • The use of accessories or replacement parts, other than those sold/specified by sensica International, may result in increased emissions or decreased immunity of the SensiLight™Mini.
Guidance and manufacturer’s declaration – electromagnetic immunity as per IEC 60601-1-2: 2007 - Table 2 The SensiLight™Mini is intended for use in the electromagnetic environment specified below. The customer or the user of the SensiLight™Mini should assure that it is used in such an environment.
Guidance and manufacturer’s declaration – electromagnetic immunity As per IEC 60601-1-2: 2007 - Table 4 The SensiLight™Mini is intended for use in the electromagnetic environment specified below. The customer or the user of the SensiLight™Mini should assure that it is used in such an environment.
Recommended separation distances between portable and mobile RF communications equipment and the SensiLight™Mini as per IEC 60601-1-2: 2007 - Table 6 The SensiLight™Mini is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
Treatment log Treatment date Treated area Comments 25
Treatment log Treatment date 26 Treated area Comments
Treatment log Treatment date Treated area Comments 27
Treatment log Treatment date 28 Treated area Comments MD-04104-A0
Labeling Model: IPL030US Power: 100 ÷ 240V x A50 ÷ 60Hz Double insulation Keep away from eyes Type BF equipment Please read all warnings and safety precautions prior to use Consult Instructions for use Do not use sensiLight™ Mini device on tanned skin or after sun exposure Use sensiLight™ Mini only with its original power supply. For your safety, never use DC adapters which are not approved by the manufacturer. Do not let the device become wet.
Fitzpatrick skin type scale 1 2 3 4 5 6 Do not use sensiLight™ Mini on naturally dark skin types. Distributed by Sensica Inc. 392 Summit Ave. Jersey City, NJ 07306, USA 855- SENSICA (855-736-7422) support@sensica.com visit us: www.sensica.
