Use and Care Guide

Smart A/C Installation issues
My Smart A/C cannot connect to my local
network
1. Make sure that you connected Sensibo Inside to your
network and that it the network is working properly (on
your mobile phone, etc.). Sensibo Inside should have a
steady blue light when it’s connected to the internet
properly. If it blinks it means there is a problem with the
connection:
a. 2 blinks repeatedly: Sensibo Inside cannot connect
to the network. This might be due to a
password/name change, proxy/security changes in
the network or just no signal from the network.
b. 3 blinks repeatedly: Sensibo Inside is connected to
the network but receives no connection.
c. LED is off = Wi-Fi chip issue, restart installation
process.
d. LED is on but no connection in app- server issue
2. Make sure that the A/C is connected to the power. If the
A/C is not connected to the power, Sensibo Inside cannot
connect to the internet and control the A/C.
A few reasons can cause your smart A/C to not be able to connect
in the installation process.
Please click on the notification to learn the reason (in iOS devices
you’ll need to reconnect to the Smart A/C’s network again).