Programming Guide

SENSEON PLUS PROGRAMMING GUIDE
7
G. Change Between Auto-Relock + Manual Lock Mode
F. Adjusting Auto-Relock Time
Tap 2x
Tap 3x
Tap 1x
Wait 3sec
Count the Beeps
Wait
3sec
Wait 1sec
2 beeps will sound
3 beeps will sound + GREEN fl ashes
will continue.
Wait a second and the mode
changes automatically.
Negative Beep = beeper OFF
Positive Beep = beeper ON
Tap the Administrator Card to stop
the beeps at the desired Auto-Relock
time.
(maximum is 255 seconds).
Tap the Administrator Card.
Tap the Administrator Card.
Tap 4x





Tap the
Administrator Card.
1 beep = 1 second
H. Adjust Sound Setting
System Adjustments - 

Wait 3sec
And Listen
4 beeps will sound.
Wait 1sec
Wait a second and the mode
changes automatically.
Positive Beep = Auto-Relock Mode
Negantive Beep = Manual Lock Mode